User manual CONCORD 4340Z

[. . . ] Ta b l e o f c o n t e n t s 1 Getting Started Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Macintosh. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press the Camera Mode button twice to return to shooting mode. You may turn the picture information such as file no. The last recorded image or video clip appears on the LCD Magnifying Images Still images can be magnified up from 1 times to 8 times. When the desired image is shown on the LCD, press T to magnify the image. Press the , , or arrows to move the magnified area around the image. Press W to zoom out. The zoom factor is shown -26- Viewing the Files in Thumbnail Mode The Thumbnail mode allows you to view up to nine images at a time on the LCD monitor. Press Camera Mode button to enter the Playback Mode ( images. The last image is highlighted in red border. Press the T button or the SET button to display the selected image in full screen size. Press the W button to view thumbnail Erasing Files From Memory Erase files that you donít want to keep to make more memory space available. You can erase individual files or all files in Playback Mode. Erasing Images Individually 1. Press Camera Mode button to enter the Playback Mode ( 2. Press MENU to exit Please note that erased images cannot be recovered. Exercise caution before erasing a file. -27- Erasing files by using the Review Menu 1. Press Camera Mode button to enter the Playback Mode ( 2. arrow to highlight Delete ALL and then press the SET button or the arrow to enter its submenu. Press or to select Single or All, arrow then press the SET button or the to enter its submenu. Press or to select Yes or No, then press the SET button to confirm. Press Camera Mode button to exit the Playback Mode. Protecting Photos and Video Clips You can protect important images from being accidentally erased. Press Camera Mode button to enter the Playback Mode ( 2. Note: After pressing the SET button to protect one image, the protect icon will be shown on the right top corner of the LCD. Press the button to close the menu window. [. . . ] Replace or recharge the batteries Make sure the battery compartment door is securely closed. The card may be defective, use a new card. Reset" on, then format the card or insert a new card. steady when The camera cannot take pictures Memory is full SD card is not formatted correctly Maximum file number is exceeded The flash doesn't fire Image is blurry or out of focus Image is not displayed on the LCD monitor Recorded images are not saved in memory Cannot transfer images to a computer after connecting the USB cable Flash is set to OFF The camera was moving when the image was captured The subject was beyond the range within which the camera can focus An SD Card with non-DCIF images (recorded with another camera) is loaded The camera was turned off/powered down before the image was stored in memory USB driver is not installed Turn the Macro mode on if the subject is within 10 cm (zoomed out) or 50 cm (zoom in) / don't use Macro mode when shooting distant subjects. [. . . ]