User manual CONCORD 5330Z

[. . . ] SYSTEM REQUIREMENTS WINDOWS · Windows®98/98 SE/Windows®2000 Prof. / Windows® Me / Windows®XP · 32 MB RAM · 110MB free memory capacity · VGA colour monitor · CD ROM drive · USB SYSTEM REQUIREMENTS IMac, iBook, G3 blue&white series, G4 series · MacOS 9. 0~10. 1. 3 · 64 MB RAM or higher · 110MB free memory capacity · VGA colour monitor · CD ROM drive · USB Thank you for purchasing the Concord Eye-Q-5330z. Please take the time to read through this instruction manual so you can enjoy all its features. This mark on your camera certifies that this camera meets the requirements of the EU (European Union) concerning interference causing equipment regulations. CE stands for Conformité Européenne (European Conformity). Digital Camera Concord Eye-Q 5330z Tested To Comply With FCC Standards FOR HOME OR OFFICE USE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference recieved, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003. [. . . ] However, even if "HARD" or "SOFT" is selected. 76 RESETING TO THE RECORDING MODE DEFAULT SETTINGS This allows you reset this camera's RECORDING MODE to the default at a time. The camera settings Flash Focus-mode Focus-Area Drive Mode Image size Quality White Balance Exposure-EV Exposure-Area Sharpness LCD The default settings Autoflash with red-eye reduction Auto Central region Single Full(2560x1920) Standard Auto 0 Central region Normal 5 77 1 Press the or press key. key so that [DEFAULT] is highlighted and 2 Press the key. key so that [YES] is highlighted and press · The camera settings are reset to the default. ·The LCD monitor display return to the recording mode menu. 78 PLAYBACK MODE 79 SINGLE-FRAME PLAY The images recorded in the CF card can be displayed by one frame on the LCD monitor. · The function dial can be rotated even when the camera is turned on. 2 When the camera is not turned on, slide the power switch to turn on the camera. · The power switch returns to the initial position. · In a while , the latest image (last recorded) is displayed on the LCD monitor. 3 Press or key to display the desired image. · When the key is pressed, the following image is displayed. When the key is pressed, the preceding image is displayed. · When the latest image (last recorded) is displayed and the key is pressed, the oldest image (first recorded) is displayed. · When the oldest image (first recorded) is displayed and the key is pressed, the latest image (last recorded) is displayed. 80 THE PLAYBACK MODE DISPLAY ON THE LCD MONITOR THE PLAYBACK MODE DISPLAY ON THE LCD MONITOR Each time the display button is pressed, the display on the LCD monitor changes in the following order. Single-frame play (with the image information) Index (9 frames) Single-frame play (with no image information) 81 THE IMAGE INFORMATION DISPLAY IN THE PLABACK MODE Frame number of the image/Total frame number recorded in the CF card Recorded date and time of the image 82 When the camera enters the index play mode, the frame number of the image displayed last in the single-frame play mode is highlighted. (The frame is the last displayed image in the figure above. ) INDEX PLAY This mode allows you to display 9 frames at a time on the LCD monitor. It is convenient when you search the desired image quickly. 1 When the camera is set to the single-frame play mode, press the display button once or twice (see page 81). · When the image information is displayed in the single-frame play mode, press the display button twice and when no information is displayed, press the display button once. · The frame number of the image displayed last in the single-frame play mode right before switching to the index play mode is highlighted. The other frame numbers are displayed white on the images. 83 2 Press key to select the desired image. · When the key is pressed, the following image is selected and the frame number of the image is highlighted. When the key is pressed, the preceding imaged is selected and the frame of the image is highlighted. · When the ninth frame is selected (when the number 9 is highlighted) and the key is pressed, the following 3 frames are displayed. [. . . ] · Do not leave the camera under direct sunlight. Do not point the lens at direct sunlight. Doing so, CCD may be damaged. 158 CARE AND STORAGE Cleaning · If the camera or the outside of the lens is dirty, gently wipe it with a soft, clean, dry cloth. If the camera or lens comes in contact with sand, gently blow away loose particles. [. . . ]