User manual CONCORD 5340Z

[. . . ] 5340z 5. 0 MEGAPIXELS User's Guide www. concord-camera. com ENGLISH Table of contents GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PACKAGE CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 SYSTEM REQUIREMENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 SAFETY INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 FCC COMPLIANCE AND ADVISORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Any flash setting can be used in macro mode. Always use the LCD monitor to compose images in macro mode. Shooting with the optical viewfinder is possible, however, images composed with the optical viewfinder might be offcentered due to the parallax phenomenon. When you do not intend to use Macro shooting anymore, remember to cancel Macro mode by pressing the button. TAKING PICTURES WITH SELF-TIMER Use the self-timer to set a delay from the time the shutter button is pressed to the time the image is shot. · The self-timer lamp starts blinking after the shutter button is fully pressed down. The image will be shot in approximately 10 seconds. The self-timer will blink faster two seconds before the shutter activates. button to until the Self-Timer icon ( ) is shown on 21 TAKING PICTURES/VIDEO CLIPS TAKING CONTINUOUS PICTURES 1. If the resolution is set at 2592 x 1944 or 2304x1728, when continuous shooting is selected, the resolution will be changed to 1600x1200 automatically. To deactivate the Continuous Shooting, press until the continuous icon disappears. button until the Continuous Shooting icon ( ) is shown on the LCD. The camera will capture 3 continuous pictures in 1600x1200 or 640x480 SHOOTING IN LONG SHUTTER MODE You can set the shutter speed to a slow setting to make dark subjects appear brighter. Set scene at "Auto" or "Night" mode. Press the or to select the setting you wish to set then press the SET button. or to select Long Shutter then press the SET or When long Shutter speed is selected, shake of the camera will decrease picture quality. If the camera shake warning appears on the LCD monitor, secure the camera to a tripod before shooting. Available Shutter Speeds The following shutter speeds are available: 1 sec, 2 sec, 4 sec, 8 sec ADJUSTING THE EXPOSURE ---EV ADJUSTMENT Adjust the exposure compensation setting to compensate for certain light conditions including: backlighting, indirect indoor lighting, and dark backgrounds. Press the or to set the exposure compensation value. Available settings are: -2. 0, -1. 7, -1. 3, -1. 0, -0. 7, -0. 3, 0. 0, +0. 3, +0. 7, +1. 0, +1. 3, +1. 7, +2. 0 then press the SET button. or to select Exposure then press the SET or button and set scene at "Auto" or "Portrait" mode 22 TAKING PICTURES/VIDEO CLIPS 4. Shoot the image. ADJUSTING COLOR TONES ---SETTING THE WHITE BALANCE When the white balance mode is set to match the light source, the camera reproduces colors more accurately. Auto Day light Shade Tungsten Fluorescent Settings are automatically set by the camera For recording outdoors on a bright day For recording under overcast, shady or twilight skies For recording under tungsten lighting For recording under fluorescent lighting 1. Set scene at "Auto" or "Portrait" mode (p. 24). or to set the white balance value then press the SET button. [. . . ] Acrobat Reader is used to read the PDF format documents. Click Utilities on the splash screen, the names of the software are shown. 2. Click on the name of the desired software and follow the on-screen instructions to install the software. 41 APPENDIX APPENDIX TROUBLESHOOTING Problem Cause Battery is inserted in the wrong direction Power does not turn on Batteries are dead The battery compartment door is open The flash is charging Memory is full The camera does not take pictures SD card is not formatted correctly Maximum file number is exceeded Image is not recorded when the shutter button is pressed The flash doesn't fire The flash is charging Memory is full Flash is set to OFF The camera was moving when the image was captured Image is blurry or out of focus The subject was beyond the range within which the camera can focus An SD Card with non-DCIF images (recorded with another camera) is loaded The camera was turned off/powered down before the image was stored in memory USB driver is not installed Solution Reload battery in the correct direction. Replace or recharge batteries Make sure the battery compartment door is securely closed. [. . . ]