User manual CONCORD INTENSE

[. . . ] If you position it on the front seat of the car, this must NOT have an AIR-BAG or it must be disconnected. · Itisonlyvalidforcarsfittedwithautomaticthreepoint fastening seat belts, approved in accordance with Regulation ECE-16, or other equivalent regulations. Do NOT use it with a two-point fastening belt. [. . . ] · Ventilationinthechassismakingitbreathable. · Impact-absorbentmaterialontheentiresurfacethat comes into contact with the baby. Comfort for the parents: · Controltheheightoftheseatbeltswiththesimplepress of a button. Avoid difficulties in installing and uninstalling straps when you need to change the height of the seat belts. · Pro-FixfasteningscompatiblewithallCONCORD ypes of chassis. · Removablecover. _ CHOOSING WHERE TO INSTALL THE SAFETy SEAT Choosing the right place where you want to install the safety seat in the car will reduce the risk of injury to your baby in the event of an accident. As far as possible, install the safety seat on the back seats. We strongly recommend that the baby is accompanied by someone sitting next to them to take care of their every need. Of the three back seats, the middle one is the safest. If you are travelling alone with your baby, it is good if you can see them without having to take your eyes off the road. Put them in the passenger seat providing that it is NOT fitted with an Air-Bag or IT IS DISCONNECTED. Under no circumstances allow yourself to be distracted from the road to see to your baby. Stop the car in a safe place. 24 25 _ 2 ADjUSTMENTS bEFORE USE Adjusting the height of the shoulder straps To ensure that they offer maximum protection, the shoulder straps on the CONCORD INTENSE safety seat must be set just above the baby`s shoulders. Check this height with the baby seated correctly in the safety seat. The lowest positions of the headrest, which are for the first few months of use, are connected to an automatic system that raises the base of the seat. The CONCORD INTENSE safety seat has a quick system for controlling the height of the shoulder straps. Simply press a button and slide the headrest. CONCORD INTENSE has 6 heights for the shoulder straps. To change position, press the switch (06) on the backrest and slide it into the desired position. Changing the position of the handle The handle has 4 positions, each of which has a specific function: Position 1: Stability, the handle stops it from tipping over when on a flat surface. [. . . ] The warranty period shall correspond to the legal warranty period for the sale of child seats applicable in the end user's country. The contents of the warranty shall comprise the remedy of a defect, the supply of a replacement, or a price reduction, at the manufacturer's discretion. The warranty shall pertain only to the first user. [. . . ]