User manual CONTAX SL300RT

[. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] 4-23) is used, the exposure compensation may differ from the specified setting for some subjects. The color of a subject varies depending on the light source used. White balance is the process of ensuring that a white object actually appears white under a given light source. Switch the camera on and press O or Q on the mode button until the "C", "N" or "M" icon lights on the mode select LED. press the MENU button K to display the menu icons. Use L or R on the 4-way button to select WHITE BALANCE [ ] and then press the OK button E. Automatically sets the white balance to suit the ambient conditions. Press the MENU button K to clear the menu icons and make picture taking easier. This setting reverts to the default (AUTO) when the camera is switched off. The frame rate refers to the number of frames shot per second in a movie. The available frame rate settings are 30 frames per second (30fps) and 15 frames per second (15fps). Movement in movies with a frame rate of 30 fps is smooth, but the large image file sizes mean that they cannot be as long as movies shot at 15 fps. Switch the camera on and press O or Q on the mode button until the "M" icon lights on the mode select LED. press the MENU button K to display the menu icons. Use L or R on the 4-way button to select FRAME/SEC [ ] and then press the OK button E. Press the MENU button K to clear the menu icons and make picture taking easier. Because this setting is retained even when the camera is switched off, you need to restore the original setting or otherwise modify the setting to suit the scene or subject being shot. The detailed settings discussed here can be used to set functions similar to those found on conventional cameras, such as AE and long exposure settings, as well as settings specific to digital cameras such as color and chroma. Detail menu SOUND COLOR MODE CHROMA SHARPNESS WB PRESET AE MODE Details and Usage Used to specify whether or not movies are shot with sound. + gives more intense colors C/N while - gives paler colors. Allows you to set your own reference value for white using a sheet of white paper, etc. Allows you to select EVALUATION, CENTER or SPOT AREA C/N as the method used by the camera to set the exposure. [. . . ] format The initialization of a memory card. Infinity Once the subject of a photograph is further than a set distance away from the camera lens, moving still further away requires no adjustment to the focus. The distance at which the subject is so far away that no change in the focus occurs is referred to as "infinity". Initialization (formatting) This is a process that organizes the internal structure of a memory card so that data can be recorded on the card. [. . . ]