User manual CORSAIR GAMING SERIES GS600 2013 EDITION 80PLUS BRONZE

[. . . ] 6W +5Vsb 3A 15W 5 Corsair Advantages Your Corsair Gaming Series power supply is packed with the latest technology and features: 4 • • I t supports the latest ATX12V v2. A n ultra-quiet 140mm double ball-bearing fan delivers excellent airflow when needed, spinning up on high loads and turning itself off for quiet operation at low loads. Up to 85% energy efficiency means less heat generation and lower energy bills. A dedicated single +12V rail offers maximum compatibility with the latest components. [. . . ] The main 24-pin power cable has a detachable 4-pin mechanism in order to support either a 24-pin or a 20-pin socket on the motherboard. If your motherboard has a 24-pin socket, you may connect the 24-pin main power cable from the power supply directly to your motherboard. If your motherboard has a 20-pin socket, you must detach the four-pin cable from the 24-pin connector, and then plug the 20-pin cable onto your motherboard without connecting the four-pin connector. If your motherboard has an eight-pin +12V socket, connect the eight-pin cable directly to your motherboard. If your motherboard has a four-pin socket, detach the four-pin from the eight-pin cable, and then plug this four-pin cable directly to your motherboard. WARNING: The detachable four-pin from the 24-pin main connector is not a “P4” or “+12V” connector. Serious damage can be caused if you use it in place of a “P4” or “+12V” connector. Connect the peripherals cables to your hard drive and CD-ROM/DVD-ROM power sockets. Connect the SATA cables to your SATA SSD or hard drive’s power sockets. Connect the PCI-Express cables to the power sockets of your PCI-Express video cards if required. Connect the peripheral cables to any peripherals requiring a small 4-pin connector. Make sure all the cables are tightly connected. Connect the AC power cord to the power supply and turn it on by pushing the switch to the ON position (marked with “I”). Length 600mm ± 25mm 650mm ± 25mm 600mm ± 25mm 600mm ± 25mm 750mm ± 25mm 750mm ± 25mm Connector/Cable 1 1 1 3 3 1 ATX Cable (24-PIN) EPS12V CPU Cable (8-PIN) PCI-E Cable SATA Cable Peripheral Cable Floppy Adapter GS700 Qty 1 1 6 2 2 2 2 Length 600mm ± 25mm 650mm ± 25mm 600mm ± 25mm 700mm ± 25mm 750mm ± 25mm 750mm ± 25mm Connector/Cable 1 1 1 4 3 1 ATX Cable (24-PIN) EPS12V CPU Cable (8-PIN) PCI-E Cable SATA Cable Peripheral Cable Floppy Adapter 7 GS800 Qty 1 1 4 2 2 2 Length 600mm ± 25mm 650mm ± 25mm 600mm ± 25mm 700mm ± 25mm 850mm ± 25mm 850mm ± 25mm Connector/Cable 1 1 1 4 4 1 ATX Cable (24-PIN) EPS12V CPU Cable (8-PIN) PCI-E Cable SATA Cable Peripheral Cable Floppy Adapter Notes: • loppy connectors are attached to the end of the peripheral cable. F • he ATX power connector has a detachable four-pin mechanism in order T to support either a 24-pin or a 20-pin socket on the motherboard. € he EPS12V power connector has a detachable four-pin mechanism in order T to support either an eight-pin socket or a four-pin “P4/12V” socket on the motherboard. You have completed installation of your new Corsair Gaming Series power supply and your system is ready to go!Fan LED Control LED output is controlled with a button near the power switch. [. . . ] If this power supply uses modular cables, use only manufacturer supplied cables. Other cables might not be compatible and could cause serious damage to your system and power supply. The 24-pin main power connector has a detachable 4-pin connector. This 4-pin connector is not a P4 or ATX 12V connector. [. . . ]