User manual COWON IAUDIO F2

[. . . ] 1. 1 E 2 Before Using Your iAUDIO F2 Legal Notice COPYRIGHT NOTICE · COWON is a registered trademark of COWON SYSTEMS, INC. · This product is intended for personal use only and may not be used for any commercial purpose without the written consent of COWN SYSTEMS, INC. · Information in this document is copyrighted by COWON SYSTEMS, INC. and no part of this manual may be reproduced or distributed without the written permission of COWN SYSTEMS, INC. [. . . ] Use the Line-In cable to connect the headphone jack of your audio source device with the Line-In jack of iAUDIO F2. Make sure the recording mode is set to Line-In in Settings ­ Recording ­ Recording Mode menu. Switch to the Record mode by pressing button and then choose Record icon. Start playing the CDP and then press button on iAUDIO F2 to start recording. During recording, press button to pause or resume recording. To listen to the recorded track, connect the earphones and press button. - Recorded files are stored in "VOICE" folder if recorded via built-in microphone, or in "RECORD" folder if recorded via Line-In cable. - To use JetEffect, Fast-forward and rewinding capabilities, the recorded audio files should be played in Music mode. - If the player was in Record mode before turning the player off, the player will start with the Record mode when turned on again. - Sound quality and capacity of recordings may vary according to reception quality and recording settings. See the section 4. 8 for further information 1. Connect iAUDIO F2 and computer with the USB cable. Transfer (copy) the image files from PC to iAUDIO F2. After the player is turned on, select Picture mode by pressing button then choosing Picture icon. Thumbnail view of images will appear on the screen. To view a selected image, press button to view the image. Press buttons to change to previous or next image. Press to zoom in and out of an image and press during zoom to move about within the image. To view the image in a rotated view, press button to open a pop-up window and select the "Pivot". To set the current image as wallpaper, press button to open a pop-up window and select the "Wallpaper". See the section 4. 5 for further information - Image can be viewed during music playback. - Only JPG (Progressive Type excluded) image files are supported and other image file formats cannot be viewed. - When rotating an image, the functions for , buttons are changed. [. . . ] & It is recommended that all video files are converted with JetAudio VX for use in iAUDIO F2. Any A video file that has not been encoded with JetAudio VX may not play in iAUDIO F2. improperly. Check the connection of the earphones to the iAUDIO F2. Loose or blocked connection can cause inadequate contact between earphone jack and the iAUDIO F2. Q FM Radio does not work. [. . . ]