User manual COWON IAUDIO T2 QUICK GUIDE VERSION 1.1W

[. . . ] Earphone module with integrated neck strap If your player is being used for the first time or if it has not been charged for a long time, make sure player is charged fully before using it · To charge iAUDIO T2, connect the player to a PC using a USB cable or connect to the AC provided adapter only. Once connected, the player will automatically turn on and start charging iii. Once the player is fully charged, the charge complete screen will appear as shown. [. . . ] Click on the following pop-up message when it appears 8. When "Safely Remove Hardware" message appears, and the OLED displays a battery you may disconnect the USB cable. - The iAUDIO T2 can recognize up to 100 folders and 999 files. - If iAUDIO drive does not appear in either My Computer or Windows Explorer, check the connection and settings, and then re-connect (Separate driver installation is required for Windows 98). - If the USB cable is connected after running `Safely Remove Hardware' wizard from the steps listed above, the player stays in the battery-charging mode. To access its memory, iAUDIO must be disconnected first and reconnected. - If the device is connected through a USB HUB, the device won't be charged. Instead, close the JetShell after file transfers have been completed, after which the player can be disconnected safely from the PC. - If the following message appears, run Safely Remove Hardware after a few minutes. Press the button to turn on the player, 3. after the splash screen and logo is displayed , the standby screen appears. (It may start playback if automatic play is selected in Settings. Press the button to play or pause music 5. Pressing the buttons allows selection of previous and next tracks as well as fast forward and rewind the current track. [. . . ] Met de toetsen en kunt u de vorige of volgende track selecteren, alsmede de huidige track snel vooruit of terugspoelen. Earphone module with integrated neck strap Earphone module with integrated neck strap Earphone module with integrated neck strap För att ladda iAUDIO T2, anslut spelaren med USB-kabel till en dator eller anslut enbart till en växelströmsadapter. Flyttar uppåt i mappstrukturen Öppnar en mapp Spelar en fil Öppnar en mapp Flyttar markören uppåt Växlar till lägesväljaren Öppnar popup Flyttar markören nedåt Flyttar markören uppåt Växlar till lägesväljaren Flyttar markören nedåt Flyttar till vänster Väljer läget Flyttar till vänster Flyttar till vänster Växlar till initialt läge Flyttar till höger [. . . ]