User manual COYOTE SPAS SPA

[. . . ] Owners Manual International Congratulations! Your choice of a Coyote Spa indicates that you are devoted to excellence. The management and staff appreciate your patronage. At Coyote SpasTM we believe a good foundation is required to build a superior product, both in design and philosophy. Canadian built with the finest materials and advanced technology, Coyote SpasTM are made to perform. . . wherever you happen to live. [. . . ] As with any water filtering system, the filter cartridge may become clogged, resulting in reduced water flow. It is important to maintain a clean, unobstructed filter system. We recommend replacing your filter with an Arctic disposable filter every three (3) months. Filter Cartridge Removal and Installation 1. Shut the spa down using the on/off button on the topside control panel. Remove the filter basket by rotating the top outside ring counterclockwise and lifting. Clean any debris out of the skimmer basket. To reinstall the filter cartridge, reverse the order of steps in which it was removed. Care of the Spa Shell Your Coyote SpasTM has a fiberglass reinforced, cast acrylic shell. Stains and dirt generally will not adhere to your spa's surface. A soft cloth or sponge should easily remove most dirt. Most household chemicals are harmful to your spa's shell. Sodium bicarbonate (baking soda) or vinegar can also be used for minor surface cleaning. Always thoroughly rinse off any spa shell cleaning agent with fresh water. Iron and copper in the water can stain the spa shell if allowed to go unchecked. Your Coyote SpasTM Dealer stocks a Stain and Scale Inhibitor to use if your spa water has a high concentration of dissolved minerals. The use of alcohol or any household cleaners other than those listed to clean the spa shell surface is NOT recommended. DO NOT use any cleaning products containing abrasives or solvents since they may damage the shell surface. Damage to the shell by the use of harsh chemicals in not covered under the warranty. 21 MANUAL SAFETY COVER MANUFACTURING DATE: RISING DRAGON MANUAL SAFETY COVER CONTROL NO. CLASSIFIED TO ASTM F1346-91 ! WARNING ! AVOID DROWNING RISK KEEP CHILDREN AWAY. CHILDREN OR OBJECTS CANNOT BE SEEN UNDER COVER. REMOVE COVER COMPLETELY BEFORE ENTRY - BATHERS ENTRAPMENT POSSIBLE. NON-SECURED OR IMPROPERLY SECURED COVERS ARE A HAZARD. FAILURE TO FOLLOW ALL INSTRUCTIONS MAY RESULT IN INJURY OR DROWNING. AVERTISSEMENT ÊVITEZ DE NOYER LE RISQUE ENFANTS DE SUBSISTANCE PARTIS. DES ENFANTS OU LES OBJETS NE PEUVENT PAS ÊTRE VUS SOUS LA COUVERTURE. [. . . ] Possible bacterial contamination, have water tested by a lab. 29 Troubleshooting Spa Problems 1. Nothing functions: The RCD breaker has tripped or there is a power failure. Turn breaker back on and see if spa powers up, if not contact your factory authorized dealer. Spa does not heat: Check to see if the heat indicator is on or there are any error messages on the topside control panel. [. . . ]