User manual CREATIVE HEADSET HS-1200

[. . . ] Congratulations on selecting Creative HS-1200 Digital Wireless Gaming Headset from Creative Labs. Delivering high-fidelity uncompressed stereo audio with powerful 40mm Neodymium drivers and clear voice communication with easy-access control buttons on the earcup, the HS-1200 Digital Wireless Gaming Headset with X-Fi Technology creates immersive 3D surround sound effect that makes you feel like you are actually in the game. Sound Blaster® X-Fi Software makes your games sound way better and gives you the competitive edge over conventional headsets. Installation CD X-Fi Crystalizer X-Fi CMSS-3D Enhances musical dynamics by emphasizing sharp percussive sounds and transients X-Fi CMSS-3D Headphone: Provides a multichannel playback experience over headphones for all types of content. [. . . ] If you suspect your Creative HS-1200 Digital Wireless Gaming Headset is not working as expected, perform the following trouble-shooting steps before having your headset serviced. If this is the first time you are using this headset, please charge for 2. Please charge your headset for minimum 6 hours if using it for the first time. Press the power up/down button on the earcup control to activate your headset. If the indicator is blinking, it means this headset needs to be paired with the USB Transceiver. Then press and hold power up/down button for >5 seconds. simultaneously , press the pairing button on the USB transceiver. When the LED indicator shows steady blue, your headset is paired. Some BUSPowered USB Hubs may not have enough power to support this device. Disconnect your USB Hub and plug the USB transceiver directly into the PC. Alternatively, you may use a USB Hub with external power source. Verify that your Volume and Playback settings are not muted, and that the volume for these devices are at least halfway up. Try unplugging and re-plugging the USB transceiver to the PC* and restart your application. On a computer system that does not follow proper USB convention, there is a chance that the system may lock up when you plug in the device. If this occurs on your system, contact your computers manufacturer. Other operating systems do not support this device. Make sure the headset is charged and powered off when you try to pair. Make sure you have press the pairing button on the USB transceiver. When you plug in the USB transceiver, the LED indicator will light up. Every electronic device is subject to radio frequency (RF) interference from external sources. [. . . ] Turn off Digital Wireless Gaming Headset while on-board any aircraft. This Digital Wireless headset system is specifically designed for the operation within the electrical range(s) with the provided USB power adaptor and use outside of this range shall be at your own risk. Do NOT operate the Digital Wireless headset system with other power adaptors. Contact Creative Customer Support should you need a replacement power adaptor. [. . . ]