User manual CREATIVE MUVO N200

[. . . ] We use the term "Scroll Select" when we want you to use the Scroller to scroll to a menu option, and then select it by pressing the Scroller. Turn the Scroller to scroll through menu options on your LCD until the option that you want, such as Play Mode , is highlighted. DO NOT connect your player to your computer before setting up the software. If you have Windows XP or Windows 2000, you must log in as an administrator in Windows before you can set up the software. [. . . ] To stop your player in Windows XP, Windows 2000 or Windows Me: Click the Safely Remove Hardware icon on the Taskbar, click Safely remove USB Mass Storage Device, and disconnect your player when you are prompted to do so. To stop your player in Windows 98 SE: In Windows Explorer, right-click the Removable Disk icon, click the Eject option, and disconnect your player when you are prompted to do so. Make sure that this status diagram appears on the LCD for at least five seconds before disconnecting your player. Press and hold the Play/Pause button until your player turns on. the CREATIVE logo appears on the LCD , followed by the MuVo logo. Music stored in your player starts playing automatically. Note that your player comes preloaded with some music to get you started. press the Volume Increase and Volume Decrease buttons to adjust the volume. After you have finished using your player, press and hold the Play/Pause button until the Power off message disappears. Listening to music at high volumes can impair your hearing. For your safety and the safety of others, do not use headphones while driving, cycling or any other activity that requires your full attention. Scroll to the audio track that you want to play and press the Play/Pause button ) You can automatically scan for all available radio stations and save up to 32 radio presets. The player scans and stores all radio stations that it can receive. at the end of the autoscan , it automatically saves all stations as presets and tunes in to the first preset. Turn the Scroller to select the preset station you want. If you are using your player in Japan, you will need to change the FM region setting. ) You can directly encode or "rip" music to your player, instead of ripping music on your computer first and then transferring it to your player. Connect the Line In jack on your player to the line output of an external stereo source, such as a CD or MiniDisc player, using the supplied Stereo cable. [. . . ] Actual contents may differ slightly from those pictured. As with any digital media-based storage device, data should be backed up regularly. We strongly recommend that you observe the usage precautions laid out in this booklet, and also back up the data in your player regularly. In no event will Creative be liable for any indirect, incidental, special or consequential damages to any persons caused by Creative's negligence, or for any lost profits, lost savings, loss of use, lost revenues or lost data arising from or relating to this device, even if Creative has been advised of the possibility of such damages. [. . . ]