User manual CREATIVE WEBCAM NX

[. . . ] User's Guide User's Guide Creative WebCam NX Information in this document is subject to change without notice and does not represent a commitment on the part of Creative Technology Ltd. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose without the written permission of Creative Technology Ltd. The software described in this document is furnished under a license agreement and may be used or copied only in accordance with the terms of the license agreement. It is against the law to copy the software on any other medium except as specifically allowed in the license agreement. [. . . ] Be sure to use the correct edition for your system. In the Insert Disk dialog box, click the OK button. Follow the instructions on the screen. Installing Creative WebCam NX 1-4 7. Check the image in the Video preview pane of the Creative WebCam NX Camera Configuration dialog box. If it flickers or displays a series of dark bands, click the Cancel Flicker button. Click the Finish button, and then restart your computer if you are prompted to do so. When a Digital Signature Not Found dialog box appears, telling you that Creative WebCam NX has been detected, ignore the message and click the Yes button. 8. For Windows 2000 only 9. 10. Check the image in the Video preview pane of the Creative WebCam NX Camera Configuration dialog box. If it flickers or displays a series of dark bands, click the Cancel Flicker button. Click the Finish button, and then restart your computer if you are prompted to do so. For Windows XP only After connecting your camera, Windows automatically detects the device. When the Found New Hardware Wizard dialog box appears, select Install the software automatically (Recommended), and then click the Next button. Figure 1-3: Digital Signature Not Found dialog box. Installing Creative WebCam NX 1-5 13. When a Hardware Installation Dialog box appears (Figure 1-4), ignore the message and click the Continue Anyway button. For more details on this warning message, see "Problems in Windows XP" on page B-3. Installation will be complete in a while. Check the image in the Video preview pane of the Creative WebCam NX Camera Configuration dialog box. If it flickers or displays a series of dark bands, click the Cancel Flicker button. Click the Finish button, and then restart your computer if you are prompted to do so. Figure 1-4: Hardware Installation dialog box Verifying the installation in Windows 98/98SE and Windows Me Verifying the installation in Windows 2000 & XP 1. 4. Right-click the My Computer icon on your desktop. On the menu that appears, click Properties. In the System Properties dialog box, click the Device Manager tab. Click the plus (+) sign next to the Imaging Device icon. The entry "Creative WebCam NX" should appear. [. . . ] Do the following: The camera is not properly connected. To resolve this problem, ensure that the camera's USB connector is inserted, and that the USB connector is enabled in the BIOS. Refer to your computer's documentation for information on the BIOS. Reinstall the video capture drivers and restart your computer. 1. Troubleshooting B-1 2. The camera's Power LED does not light up, or in Windows 98/98 SE, Me and 2000, the computer restarts for no apparent reason. [. . . ]