User manual CRESTON CEN-TRACK

[. . . ] Crestron CEN-TRACK Tuner Rack Operations Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON Regulatory Compliance As of the date of manufacture, the Sortname has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. Federal Communications Commission (FCC) Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. [. . . ] 4. Clear Save Turn the TUNE knob to highlight a preset location. Press the soft key labeled Save to store the preset. "Replace preset with. . . " Screen Replace preset with. . . 88. 30 FM OK 5. Cancel Press the soft key labeled OK to store the preset. To cancel, press the soft key labeled Cancel. To clear an existing preset: 1. The "Presets" screen will be displayed. Presets (FM Band) FM Presets 1. 3. Clear Save Turn the TUNE knob to highlight the preset to be cleared. The display will show a message asking for confirmation to clear the preset. Operations Guide ­ DOC. 6646B Tuner Rack: CEN-TRACK · 29 Tuner Rack Clear Preset Confirmation Crestron CEN-TRACK Are you sure you want to clear this preset? OK 4. Cancel Recall Presets Press the soft key labeled OK to clear the preset or press the soft key labeled Cancel to cancel. The list of presets will be displayed. "FM Presets" Screen FM Presets 1. 3. Clear Save To change bands, press the soft key labeled Band. Turn the TUNE knob to highlight the preset station to be recalled. View Signal Strength (ATC-AMFMSRD and ATC-AMFM2 only) 4. Press the button under Tech to view the signal strength. "FM Signal Strength" Screen FM Signal Strength: 98% AMFM1 Stereo Mono NOTE: Signal strength information is not available on the ATC-AMFMXMD. Control the SIRIUS Tuner The SIRIUS tuner controls allow you to tune stations and store and recall presets. It also provides controls to apply a parental lock to selected stations or hide selected stations from the channel list. To select a SIRIUS tuner, press the TUNERS button for an installed SIRIUS tuner. Turn the TUNE knob to select the desired station. The "Presets" screen will be displayed. Store and Clear Presets 30 · Tuner Rack: CEN-TRACK Operations Guide ­ DOC. 6646B Crestron CEN-TRACK Presets Tuner Rack Presets 1. 4. Save Turn the TUNE knob to highlight a preset location. Press the soft key labeled Save to store the preset. "Replace preset with. . . " Screen Replace preset with. . . Pure Jazz (72) OK 5. Cancel Press the soft key labeled OK to store the preset. To cancel, press the soft key labeled Cancel. To clear an existing preset: 1. The "Presets" screen will be displayed. Presets Presets 1. 3. Save Turn the TUNE knob to highlight the preset to be cleared. The display will show a message asking for confirmation to clear the preset. Clear Preset Confirmation Are you sure you want to clear this preset? OK 4. Cancel Recall Presets Press the soft key labeled OK to clear the preset or press the soft key labeled Cancel to cancel. [. . . ] It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. [. . . ]