User manual CRESTON TPMC-4SMD

[. . . ] Crestron TPMC-4SMD IsysTM 4. 3" Wall Mount Designer Touchpanel Operations & Installation Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON Regulatory Compliance As of the date of manufacture, the TPMC-4SMD has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. Federal Communications Commission (FCC) Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. [. . . ] Wipe touchscreen clean and avoid getting moisture beneath the bezels. CAUTION: Do not apply excessive pressure to the touchscreen display during handling. Doing so can crack the screen and damage the touchpanel. Operations & Installation Guide ­ DOC. 7027A IsysTM 4. 3" Wall Mount Designer Touchpanel: TPMC-4SMD · 27 IsysTM 4. 3" Wall Mount Designer Touchpanel Crestron TPMC-4SMD Programming Software Have a question or comment about Crestron software?Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron Web site. To post a question or view questions you have submitted to Crestron's True Blue Support, log in at www. crestron. com/support. First-time users will need to establish a user account. Earliest Version Software Requirements for the PC NOTE: Crestron recommends that you use the latest software to take advantage of the most recently released features. The latest software is available from the Crestron Web site. Crestron has developed an assortment of Windows-based software tools to develop a controlled system. For the minimum recommended software versions, visit the Version Tracker page of the Crestron Web site (www. crestron. com/versiontracker). Programming with Crestron SystemBuilder Crestron SystemBuilder is the easiest method of programming but does not offer as much flexibility as SIMPL Windows. For additional details, download SystemBuilder from the Crestron Web site and examine the extensive help file. Programming with SIMPL Windows NOTE: While SIMPL Windows can be used to program the TPMC-4SMD, it is recommended to use SystemBuilder for configuring a system. SIMPL Windows is Crestron's premier software for programming Crestron control systems. It is organized into two separate but equally important "Managers". Configuration Manager Configuration Manager is the view where programmers "build" a Crestron control system by selecting hardware from the Device Library. To incorporate the TPMC-4SMD into the system, drag the TPMC-4SMD from the Touchpanels | Touchpanels (Ethernet) folder of the Device Library and drop it in the System Views. 28 · 4. 3" IsysTMWall Mount Designer Touchpanel: TPMC-4SMD Operations & Installation Guide ­ DOC. 7027A Crestron TPMC-4SMD IsysTM 4. 3" Wall Mount Designer Touchpanel Locating the TPMC-4SMD in the Device Library The system tree of the control system displays the device in the appropriate slot with a default IP ID as shown in the following illustration. C2ENET-2 Device, Slot 8 2. If additional TPMC-4SMD devices are to be added, repeat step 1 for each device. Each TPMC-4SMD is assigned a different IP ID number as it is added. If necessary, double click a device to open the "Device Settings" window and change the IP ID, as shown in the following illustration. 3. Operations & Installation Guide ­ DOC. 7027A IsysTM 4. 3" Wall Mount Designer Touchpanel: TPMC-4SMD · 29 IsysTM 4. 3" Wall Mount Designer Touchpanel "Device Settings: Crestron TPMC-4SMD" Window Crestron TPMC-4SMD NOTE: The ID code specified in the SIMPL Windows program must match the IP ID of each unit. Refer to "Identity Code" on page 10. Program Manager Program Manager is the view where programmers "program" a Crestron control system by assigning signals to symbols. The symbol can be viewed by double clicking on the icon or dragging it into Detail View. [. . . ] CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee plus shipping costs on any products returned with an RMA. Return freight charges following repair of items under warranty shall be paid by CRESTRON, shipping by standard ground carrier. In the event repairs are found to be non-warranty, return freight costs shall be paid by the purchaser. 2. 3. CRESTRON Limited Warranty CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in materials and workmanship under normal use for a period of three (3) years from the date of purchase from CRESTRON, with the following exceptions: disk drives and any other moving or rotating mechanical parts, pan/tilt heads and power supplies are covered for a period of one (1) year; touchscreen display and overlay components are covered for 90 days; batteries and incandescent lamps are not covered. [. . . ]