User manual CRESTRON AAS

[. . . ] Crestron AdagioTM AAS-1/2/4 Audio Server Operations Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2006 Crestron Electronics, Inc. Crestron AdagioTM AAS-1/2/4 Audio Server Contents Audio Server: Adagio AAS-1/2/4 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] For information on connecting Ethernet devices in a Crestron system, refer to the latest version of the Crestron e-Control Reference Guide (Doc. 6052), which is available for download from the Crestron website (www. crestron. com/manuals). Installation CAUTION: The AAS cannot be mounted in a rack or at an angle. Damage to the internal hard drive and CD player may result. For additional details, download SystemBuilder from the Crestron website and examine the extensive help file. Programming with SIMPL Windows SIMPL Windows is Crestron's premier software for programming Crestron control systems. It is organized into two separate, but equally important "Managers". Configuration Manager Configuration Manager is the view where programmers "build" a Crestron control system by selecting hardware from the Device Library. · To incorporate the AAS into the system, drag the AAS symbol from the Ethernet Control Modules | Ethernet Audio Modules folder of the Device Library and drop it in the System Views. NOTE: It is suggested that you use the SIMPL windows example program referred to in the following section. Operations Guide ­ DOC. 6465 Audio Server: Adagio AAS-1/2/4 · 9 Audio Server Locating the AAS in the Device Library Crestron AdagioTM AAS-1/2/4 · The system tree of the control system displays the device in the appropriate slot with the IP ID (03) assigned to it by SIMPL as shown in the following illustration. C2I-AdgenetNet Device, Slot 11 · · Additional AASs are assigned different Net ID numbers as they are added. If necessary, double click a device to open the "Device Settings" window and change the IP ID, as shown in the following figure. 10 · Audio Server: Adagio AAS-1/2/4 Operations Guide ­ DOC. 6465 Crestron AdagioTM AAS-1/2/4 Audio Server "AAS-1/2/4 Device Settings" Window · Programming Manager The IP ID specified in the SIMPL Windows program must match the IP ID of each unit. Programming Manager is the view where programmers "program" a Crestron control system by assigning signals to symbols. The symbol can be viewed by double clicking on the icon or dragging it into Detail View. A description for each signal in the symbol is described in the SIMPL Windows help file (F1). Example Program An example program for the AAS is available from the "Example Program" section of the Crestron website (http://www. crestron. com/exampleprograms). Operations Guide ­ DOC. 6465 Audio Server: Adagio AAS-1/2/4 · 11 Audio Server Crestron AdagioTM AAS-1/2/4 Uploading and Upgrading Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features. However, before attempting to upload or upgrade, it is necessary to establish communication. Establishing Communication Access the AAS' web interface by typing the IP address of the AAS into the location or address field of your web browser. This is the only supported method of communication for uploading/upgrading firmware and software. TPC/IP Communication NOTE: Required for operation with the web interface. Ethernet Communication · · Establish Ethernet communication between AAS and PC. If connecting through a hub or router, use CAT5 straight through cables with 8-pin RJ-45 connectors. Alternatively, use a CAT5 crossover cable to connect the two LAN ports directly, without using a hub. Use the web interface to ensure your network settings (Menu | Setup | Network Settings) are set to Ethernet for Internet Access and Static for Ethernet Mode. · NOTE: The remote control can also be used to access these settings. Refer to the Crestron Adagio User's Guide (Part Number 2014056) for details. · · Enter the IP address and Subnet mask of the AAS (Menu | Setup | Static Ethernet Settings). Ensure that the Software Update settings are correct (Menu | Setup | Software Update Settings), that they point to "adagio. crestron. com" as the server and that they list the correct user name, password and domain. NOTE: Only local updates require a username and password. [. . . ] Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N. J. or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. [. . . ]