User manual CRESTRON C2-AUDIO-6PAK

[. . . ] Crestron C2-AUDIO-6PAK Six-Zone Audio Package Reference Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. 2003 Crestron Electronics, Inc. Crestron C2-AUDIO-6PAK Six-Zone Audio Package Contents Six-Zone Audio Package: C2-AUDIO-6PAK 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Hardware Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] From the pull-down above the user interface on the screen, as shown after this paragraph, choose a room. The top six buttons of the keypad need to be assigned to override the default settings. Move the cursor over one of the buttons and notice that the perimeter of the button changes to a blue color. Selection of a button changes the perimeter color to red and enables the Selected Source Button area of the screen. Select an available source from the Source: field and assign a label for the button on the keypad. Select another room and repeat the process. NOTE: The keypad has standard source selector switch caps installed and a kit of custom switch caps is supplied with the C2-AUDIO-6PAK. Instructions for installing the custom switch caps or re-arranging the standard switch caps is 14 · Six-Zone Audio Package: C2-AUDIO-6PAK Reference Guide ­ DOC. 8188B Crestron C2-AUDIO-6PAK Six-Zone Audio Package provided in the latest revision of the C2N-DBN12 and C2N-DBF12 Operations Guide (Doc. NOTE: The lower six buttons on the keypad are fixed. NOTE: The Net ID of each user interface is room specific and shown beneath the user interface on the screen. Add Rooms The switch caps on the lower six buttons on the keypad are fixed and cannot be altered. These include the On/Off button, Volume Up and Down, and Mute. The left and right arrow buttons are for the standard Next and Prev commands, as assigned in the Command tab of the "Device # Properties" window, as described in "Step 2: Add Sources" on page 11. After configuring the buttons, click Next. Upload the System NOTE: The CP2E has a built-in Ethernet port and web-server. If a CP2E is part of your audio system, use the features in SIMPL Windows and VT Pro-e after compiling to take advantage of Crestron e-Control capabilities. Search each application's help file for Ethernet / e-Control details. Also, review the latest version of the Crestron e-Control Reference Guide (Doc. 6052), which is available from the Downloads | Product Manuals section of the Crestron website (www. crestron. com). The Finish screen, shown after this paragraph, provides the final steps to building the logic for the system. This involves creating and compiling the SIMPL Windows program and uploading it to the control system. The completed SIMPL Windows program is saved with the . smw extension in the system's program folder. It contains all the logic that enables communication between the control system, button panels, controlled devices and other C2-AUDIO-6PAK hardware. Reference Guide ­ DOC. [. . . ] Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N. J. , or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. [. . . ]