User manual CRESTRON CNXRMCS

[. . . ] The cord to the 2-pin connector is approximately six feet long and is polarized with the solid black wire for ground and the striped wire as the signal wire. The connector attaches to the SENS port of a Room Solution Box. CNXRMCS Physical Views 2 · Current Sensor for Room Solution Boxes: CNXRMCS Operations Guide ­ DOC. 8175A Crestron CNXRMCS Current Sensor for Room Solution Boxes Setup Connector Wiring Insert the 2-pin connector in the current sensor connection (labeled "SENS") on a Room Solution Box. [. . . ] Verify that the television turns OFF/ON manually. Verify that each digital output wire and the 2-pin connector are firmly connected. Confirm that the power outlet has AC voltage and that the CNXRMCS is firmly plugged in the outlet. Confirm that the CNXRMCS outlet has AC when plugged in the power outlet and the high current device plug is firmly plugged in the CNXRMCS outlet. Television not operating properly. CNXRMCS digital output wires or connector not firmly connected. No power to television or other high current device. CNXRMCS is not receiving power. CNXRMCS is not transferring power to its outlet. Operations Guide ­ DOC. 8175A Current Sensor for Room Solution Boxes: CNXRMCS · 5 Current Sensor for Room Solution Boxes Crestron CNXRMCS Further Inquiries If after reviewing this Operations Guide for the CNXRMCS, you cannot locate specific information or have questions, please take advantage of Crestron's award winning customer service team by calling: · In the US and Canada, call Crestron's corporate headquarters at 1-888-CRESTRON [1-888-273-7876]. · In Europe, call Crestron International at +32-15-50-99-50. · In Asia, call Crestron Asia at +852-2341-2016. · In Latin America, call Crestron Latin America at +5255-5093-2160. · In Australia and New Zealand, call Crestron Control Solutions at +61-2-9737-8203. Future Updates As Crestron improves functions, adds new features, and extends the capabilities of the CNXRMCS, additional information may be made available as manual updates. These updates are solely electronic and serve as intermediary supplements prior to the release of a complete technical documentation revision. Check the Crestron website (www. crestron. com) periodically for manual update availability and its relevance. Updates are available from the Download | Product Manuals section and are identified as an "Addendum" in the Download column. 6 · Current Sensor for Room Solution Boxes: CNXRMCS Operations Guide ­ DOC. 8175A Crestron CNXRMCS Current Sensor for Room Solution Boxes Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N. J. , or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. [. . . ] Repaired or replaced equipment and parts supplied under this warranty shall be covered only by the unexpired portion of the warranty. Except as expressly set forth in this warranty, CRESTRON makes no other warranties, expressed or implied, nor authorizes any other party to offer any warranty, including any implied warranties of merchantability or fitness for a particular purpose. Any implied warranties that may be imposed by law are limited to the terms of this limited warranty. This warranty statement supercedes all previous warranties. Trademark Information All brand names, product names, and trademarks are the sole property of their respective owners. [. . . ]