User manual CRESTRON IW TPS-4500 5000 6000

[. . . ] TPS ­ 6000, 5000 & 4500 INSTALLATION GUIDE INDEX: A) CONNECTING THE TPS PANEL USING THE TPS-IMC 1) CONNECTING THE TPS PANEL TO THE TPS-IMC 2) CONNECTING THE AUDIO TO THE TPS-IMC 3) CONNECTING THE VIDEO TO THE TPS-IMC 4) CONNECTING THE RGB TO THE TPS-IMC B) CONNECTING THE TPS PANEL USING THE TPS-IMC-BV 1) CONNECTING THE TPS PANEL TO THE TPS-IMC-BV 2) CONNECTING THE AUDIO TO THE TPS-IMC-BV 3) CONNECTING THE VIDEO TO THE TPS-IMC-BV 4) CONNECTING THE RGB TO THE TPS-IMC-BV C) CONNECTING THE TPS PANEL USING THE TPS-IMW 1) CONNECTING THE TPS PANEL TO THE TPS-IMW 2) CONNECTING THE AUDIO TO THE TPS-IMW 3) CONNECTING THE VIDEO TO THE TPS-IMW 4) CONNECTING THE RGB TO THE TPS-IMW D) CONNECTING ETHERNET TO THE TPS PANEL E) CUSTOM INSTALLATION & CABLES 1) TPS-BLOCK10 2) TPS CABLES CONNECTING THE TPS PANEL USING THE TPS-IMC Panel Connection for 6000, 5000 and 4500. - One supplied with each TPS-5000 and TPS-6000; add additional units to provide connectivity at multiple locations. - Provides breakout from the 10-pin Net/Video cable and 9-pin audio cable (15' included with touchpanel; other lengths available. ) - For Cresnet only, TPS-IMC is not mandatory if audio and video are not being used, although a custom 10-pin cable solution would be required (see TPS-Block10 below. ) 1) CONNECTING THE TPS PANEL TO THE TPS-IMC 2) CONNECTING THE AUDIO TO THE TPS-IMC Audio is available for the TPS-6000 and 5000. [. . . ] Provides all of the functionality of a reqular TPS-IMC and adds buffering and breakout for the 10-pin balanced XVGA cable, and a 8-pin audio cable. Add additional units to provide connectivity at multiple locations. 1) CONNECTING THE TPS PANEL TO THE TPS-IMC-BV NET/VIDEO(10PIN/RJ45) RGB(10PIN/RJ45) AUDIO(8PIN/RJ45) 2) CONNECTING THE AUDIO TO THE TPS-IMC-BV Audio is available for the TPS-6000 and 5000. The TPS-IMC-BV supports Balanced and Unbalanced inputs. 3) CONNECTING THE VIDEO TO THE TPS-IMC-BV Video is available for the TPS-6000, 5000 and 4500. Before video can be enabled the TPS-VID card must be installed. (For further information on installation please reference the TPS-VID manual) Connect to a video source only if the TPS-VID expansion card is installed in the touchpanel. The BNC connectors and RJ45 connector are connected in parallel. For balanced video, use the RJ45. 4) CONNECTING THE RGB TO THE TPS-IMC-BV RGB is only available for the TPS-6000 and 5000. - Alternate XVGA card for TPS-6000 and 5000. - Provides a 10-pin connector directly on the back of the touchpanel base. - TPS-IMC-BV ships with 15' triamese cable consisting of a 10-pin net/video cable, a 10pin balanced XVGA cable, and an 8-pin audio cable. Before RGB video can be enabled the TPS-XVGA-BV must be installed. (For further information on installation please reference the TPS-XVGA-BV manual) 15 PIN DB CONNECTION CONNECTING THE TPS PANEL USING THE TPS-IMW Panel Connection for 6000, 5000 & 4500 2-Gang wall-mount version of TPS-IMC. If audio is not required, substitute TPS-4500IMW. 1) CONNECTING THE TPS PANEL TO THE TPS-IMW 2) CONNECTING THE AUDIO TO THE TPS-IMW Audio is available for the TPS-6000 and 5000. TPS-IMW supports balanced and unbalanced audio. 3) CONNECTING THE VIDEO TO THE TPS-IMW Video is available for the TPS-6000, 5000 and 4500. [. . . ] Use a 3rd TPS-BLOCK10 or any standard panel-mount 8-pin RJ-45 jack for the audio. The TPS-BLOCK10 falls in line between the touchpanel and the IMC or IMC-BV breakout The total cable length between the touchpanel and the IMC or IMC-BV should be kept as short as possible, never to exceed 50'. Several manufacturers are providing solutions to allow mounting of one or more TPSBLOCK10's into their interface panels and pop-ups. TPS-BLOCK10 EXTRON AAP Panels are 2-Space AAP's and allow the mounting of a Single TPSBLOCK-10 assembly or (2) TPS BLOCK-10 assemblies. 2) TPS CABLES TPS-CBL-3/6/9 Maximum cable length is 30ft for the Net/Video cable. TPS-CBL-S3/6/9 Maximum cable length for the Net/Video and Audio cable is 30ft. TPS-CBL-T3/6/9 Maximum cable length for the Net/Video, Audio and RGB cable is 30ft. [. . . ]