User manual CRESTRON PMK-15L

[. . . ] For custom touchpanel placement without a stud, use the WMKT-15L or the WMKM-15L. The PMK-15L includes an 18 AWG bus wire to secure touchpanel cabling prior to drywall installation and to avoid damaging the cables when the opening is routed. Refer to the physical views (bottom, side, and front) of the PMK-15L, shown after this paragraph. The table that follows lists all parts included with the PMK-15L. [. . . ] 6355), TPS-12G/15G-L Operations Guide (Doc. 6356), or the TPMC-15/17-L Series Operations Guide (Doc. 6354) for installation instructions. Attaching Cover PRE-CONSTRUCTION PLATE (2012866) MUST BE LEVEL BEFORE APPLICATION OF SHEET ROCK. DRYWALL STUD Crestron PMK-15L Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N. J. , or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. Return freight charges following repair of items under warranty shall be paid by CRESTRON, shipping by standard ground carrier. In the event repairs are found to be nonwarranty, return freight costs shall be paid by the purchaser. 2. SCREW, #6-32, 1-1/2"L PAN HEAD SCREW (2007254) QTY. 8 3. METAL COVER PLATE (2012865 SUPPLIED) USED TO COVER CUTOUT IN THE DRYWALL IF TOUCHPANEL IS NOT INSTALLED. (IF REQUIRED BY LOCAL BUILDING CODES) CAUTION: Allow an air gap of at least 12 inches in the wall cavity above the touchpanel for heat dissipation. NOTE: Prior to mounting the touchpanel, ensure that the PMK-15L is flush with the drywall (no kinks or bends in the metal). Any separation may make screwing in the touchpanel more difficult. One can purchase and attach a TMK-15L or an MMK-15L to keep the PMK-15L straight. CRESTRON Limited Warranty CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in materials and workmanship under normal use for a period of three (3) years from the date of purchase from CRESTRON, with the following exceptions: disk drives and any other moving or rotating mechanical parts, pan/tilt heads and power supplies are covered for a period of one (1) year; touchscreen display and overlay components are covered for 90 days; batteries and incandescent lamps are not covered. This warranty extends to products purchased directly from CRESTRON or an authorized CRESTRON dealer. [. . . ] Windows is a registered trademark of Microsoft Corporation. Windows95/98/Me/XP and WindowsNT/2000 are trademarks of Microsoft Corporation. Further Inquiries If you cannot locate specific information or have questions after reviewing this guide, please take advantage of Crestron's award winning customer service team by calling the Crestron corporate headquarters at 1-888-CRESTRON [1-888-273-7876]. For assistance in your local time zone, refer to the Crestron website (www. crestron. com) for a listing of Crestron worldwide offices. You can also log onto the online help section of the Crestron website to ask questions about Crestron products. [. . . ]