User manual CRESTRON PMK-3000L

[. . . ] The table that follows lists all parts included with the PMK-3000L. PMK-3000L Physical Views PINS USED WITH OPTIONAL MUDRING (MTPL02850-1) FOR DRYWALL SCREW (PROVIDED BY OTHER) Metal Plate Secured to Stud 0. 06 in THICK (0. 15 cm) FOR DRYWALL NAIL (PROVIDED BY OTHER) FOR DRYWALL NAIL (PROVIDED BY OTHER) SECURE 18 AWG BUS WIRE IN NOTCH TO HANG CABLE AWAY FROM DRYWALL CUTTING TOOLS 7. 30 in 7. 84 in (18. 54 cm) (19. 91 cm) FOR DRYWALL SCREW (PROVIDED BY OTHER) FOR DRYWALL NAIL (PROVIDED BY OTHER) 21/32" STUD OFFSET (17 mm) 4. 12 in (10. 47 cm) 4. 88 in (12. 38 cm) 11. 59 in (29. 44 cm) 0. 27 in (0. 69 cm) The plate is designed to provide the necessary support for a single touchpanel and can mount to the right or left side of a stud. Confirm that the PMK-3000L is level before application of drywall. A rectangular opening with the dimensions shown in the illustration after this paragraph must be made in the drywall. [. . . ] To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, Cresskill, N. J. , or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. Return freight charges following repair of items under warranty shall be paid by CRESTRON, shipping by standard ground carrier. In the event repairs are found to be nonwarranty, return freight costs shall be paid by the purchaser. DRYWALL METAL COVER PLATE MTCV02883-1 (4) #6-32 X 1-1/2"L PAN HEAD SCREW (SR06-32-1R5000-2) 2. Finished Installation 3. CRESTRON Limited Warranty CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in materials and workmanship under normal use for a period of three (3) years from the date of purchase from CRESTRON, with the following exceptions: disk drives and any other moving or rotating mechanical parts, pan/tilt heads and power supplies are covered for a period of one (1) year; touchscreen display and overlay components are covered for 90 days; batteries and incandescent lamps are not covered. This warranty extends to products purchased directly from CRESTRON or an authorized CRESTRON dealer. Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any. CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures. Furthermore, this warranty does not cover any product that has had the serial number altered, defaced, or removed. This warranty shall be the sole and exclusive remedy to the original purchaser. [. . . ] Windows95/98/Me/XP and WindowsNT/2000 are trademarks of Microsoft Corporation. Further Inquiries If after reviewing this sheet, you cannot locate specific information or have questions, please take advantage of Crestron's award winning customer service team by calling: · In the US and Canada, call Crestron's corporate headquarters at 1-888-CRESTRON [1-888-273-7876]. In Europe, call Crestron International at +32-15-50-99-50. In Asia, call Crestron Asia at +852-2341-2016. [. . . ]