User manual CRESTRON RG UPX-2 UPX-2-1GB UPX-2-MSO

[. . . ] Crestron UPX-2 Universal Presentation Processor Reference Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. Windows® and Windows® XP are registered trademarks of Microsoft Corporation in the United States and other countries. ©2006 Crestron Electronics, Inc. Crestron UPX-2 Universal Presentation Processor Contents Universal Presentation Processor: UPX-2 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 6286A Crestron UPX-2 Universal Presentation Processor sure to use the Open/Close feature, and not a width or height of zero, to make the application disappear. · Edit the Default Path in the "Embedded Application Property" window to point to your new location. The UPX-2 supports removable storage devices such as compact flash via PC-Card or USB interface. When a device is inserted (for example, a PCCard in the front port of the UPX-2), a drive letter is automatically assigned by the UPX-2 for access to that storage. The first device is assigned the drive letter G. Allowable drive letters are G through L. If the assigned drive letter is for temporary use, no further steps are required. If one or more devices are added to the UPX-2 for continuous use, ensure they are connected and then reboot the UPX-2. The assigned drive letters will not change unless you change the connected devices or reboot without the device(s) connected. From this point forward, you can connect and disconnect other temporary use devices without rebooting. This is only a configuration step and not required for normal use. The device will function even if this step is not performed. However, this will guarantee the drive assignment letter will remain consistent for long-term use. NOTE: The flash card can also be used to save and retrieve MediaMarker presentations. Programming Example The following programming example represents one possible solution for a typical embedded application. In VT Pro-e, open the "Embedded Application Property" window, enter a digital join number and select the default path that includes the filename. This can be one of the drives on the front of the UPX-2 (drive G through L) or a network drive. In SIMPL Windows, setup the following logic that allows you to open and close an embedded application, and report the open/close state of the application. NOTE: The following example requires the touchpanel interface symbol, a one-shot symbol, and a toggle symbol. 2. Reference Guide - DOC. 6286A Universal Presentation Processor: UPX-2 · 23 Universal Presentation Processor SIMPL Windows Programming, Embedded Applications ­ Excel On/Off Example Crestron UPX-2 This example has join #1 assigned to a button that is used to toggle the state of Excel. Press 1 is routed to the clock line of a toggle symbol. The output of the toggle is routed to fb 2. Join #2 is referred to as the "Open/Close Excel" state digital join. [. . . ] or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. Return freight charges following repair of items under warranty shall be paid by CRESTRON, shipping by standard ground carrier. [. . . ]