User manual CRESTRON SER-3000

[. . . ] CRESTRON Contents Series 3000 Touchpanels 1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Functional Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Physical Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Configuration Differences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Save Setup It is advisable to regularly save setup parameters if the user is satisfied with the settings. If parameters are saved, the settings are restored in the event of a power failure. The Save Setup button located just above the Return button in the corner of the Setup Menu may be selected at any time to save setup parameters. The button text changes color from black to light gray text while in save mode. Return Select the Return button, located at the lower right corner of the Setup Menu, after setup parameters have been set. Backlight Timeout Menu NOTE: Display backlight requires warm-up time. A display reaches 80% of its final level in five minutes and full brightness in 20 minutes. The touchpanel display hardware life can be lengthened by turning off the backlight when the touchpanel is inactive. The Backlight Timeout button is located in the middle row of the third column of the Setup Menu. Selection of this button changes the touchpanel display to reveal the Backlight Menu, shown below. The length of touchpanel inactivity can be specified to minimize power utilization. Backlight Menu Operations Guide - DOC. 8094B Series 3000 Touchpanels · 11 CRESTRON BACKLIGHT TIMEOUT is displayed on the Backlight Menu. This setting turns the backlight off when the touchpanel is inactive for a specified time frame (shown in minutes). When the touchpanel is activated, the last screen to be displayed reappears. A two minute BACKLIGHT TIMEOUT is shown in the illustration. Minutes can vary from 0 to 120, where 0 disables the timeout. Down and up arrow buttons decrease and increase the timeout, respectively. Although the STX POWER DOWN TIMEOUT is displayed on the Backlight Menu, its functionality is disabled for Series 3000 Touchpanels. After the timeout parameter is set, touch the SAVE TIMEOUTS button in the lower left corner of the menu to save the new settings. Touch the RETURN button, located in the bottom right corner of the screen, to display the Setup menu. Panel Tracking Panel tracking is a useful communication feature between touchpanels when more than one touchpanel exists on the network. Panel tracking is enabled when the Panel Track button, centrally located in the top row of the Setup Menu, is selected. [. . . ] NET. ID <03 to FE>: CTP-3000 i1 o1 " i4 o4 = <relay1> = <relay1_fb> =" " = <relay4> =<relay4_fb> \i1 refers to join# of touchpanel button 20 · Series 3000 Touchpanels Operations Guide - DOC. 8094B CRESTRON Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. [. . . ]