User manual CRESTRON ST-1550

[. . . ] Crestron ST-1550 & 1550C 1-Way Wireless RF Touchpanels Operations Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON Crestron ST-1550 & ST-1550C 1-Way Wireless RF Touchpanels Contents 1-Way Wireless RF Touchpanels: ST-1550 & St-1550C 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Leading Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Industry Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] It provides a well-designed graphical environment with a number of workspaces 10 · 1-Way Wireless RF Touchpanels: ST-1550 & ST-1550C Operations Guide ­ DOC. 5803A Crestron ST-1550 & ST-1550C 1-Way Wireless RF Touchpanels (i. e. , windows) in which a programmer can select, configure, program, test, and monitor a Crestron control system. SIMPL Windows offers drag and drop functionality in a familiar Windows® environment. This section describes a sample SIMPL Windows program that includes a touchpanel. Configuration Manager is where programmers "build" a Crestron control system by selecting hardware from the Device Library. In Configuration Manager, drag the PRO2 from the Control Systems folder of the Device Library and drop it in the upper pane of the System Views. The PRO2 with its associated communication ports is displayed in the System Views upper pane. PRO2 System View The System Views lower pane displays the PRO2 system tree. This tree can be expanded to display and configure the communications ports. Expanded PRO2 System Tree C2Net-Device Slot in Configuration Manager To incorporate a Touchpanel into the system, a gateway device is required. The C2Net-Device Slot can accept a gateway such as the CNRFGWA. Once a gateway is configured in a C2Net-Device Slot, the slot allows Cresnet communication between the touchpanel and the control system. In Configuration Manager, drag the CNRFGWA gateway from the Wireless Receivers (RF) folder of the Device Library. The System Views upper pane displays the CNRFGWA device icon below the PRO2 graphic. NOTE: An ST-CP control processor is automatically configured with a CNRFGWA in its STCP-Net Device Slot 3 when the ST-CP is dragged into the upper pane of System Views. Drag the ST-1550 from the Touchpanels (Wireless | Wireless one way) folder of the Device Library and drop it on the CNRFGWA symbol in System Views. The PRO2 system tree displays the CNRFGWA gateway in Slot 9, with a default NET ID of 24. The CNRFGWA displays the touchpanel at the touchpanel's default RF ID location, "10, " as shown in the following illustration. Operations Guide ­ DOC. 5803A 1-Way Wireless RF Touchpanels: ST-1550 & ST-1550C · 11 1-Way Wireless RF Touchpanels C2Net Device, Slot 9 Crestron ST-1550 & ST-1550C Double-click the CNRFGWA icon in the upper pane to open the "Device Settings" window. This window displays CNRFGWA device information. Select the Net ID tab to change the gateway Net ID, as shown in the following figure. Device Settings Window for the CNRFGWA Similarly, expand the system tree in the lower pane and double-click the ST-1550 icon to open the "Device Settings" window for the touchpanel. Select the RF/IR ID tab to change the touchpanel RF ID, as shown in the following figure. For more information on setting the RF/IR ID, see Interface on page 5. NOTE: The hardware and software settings of the RF ID must match. [. . . ] Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. Return freight charges following repair of items under warranty shall be paid by CRESTRON, shipping by standard ground carrier. In the event repairs are found to be non-warranty, return freight costs shall be paid by the purchaser. 2. 3. CRESTRON Limited Warranty CRESTRON ELECTRONICS, Inc. [. . . ]