User manual CRESTRON ST-PC

[. . . ] Crestron ST-PC Dual AC Power Control Module Operations Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. © 2003 Crestron Electronics, Inc. Crestron ST-PC Dual AC Power Control Module Contents Dual AC Power Control Module: ST-PC 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features and Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] SIMPL Windows is Crestron's software for programming Crestron control systems. It provides a well designed graphical environment with a number of workspaces (i. e. , windows) in which a programmer can select, configure, program, test, and monitor a Crestron control system. SIMPL Windows offers drag and drop functionality in a familiar Windows® environment. This section describes a sample SIMPL Windows program that includes an ST-PC. Operations Guide ­ DOC. 5708A Dual AC Power Control Module: ST-PC · 9 Dual AC Power Control Module Crestron ST-PC Configuration Manager is where programmers "build" a Crestron control system by selecting hardware from the Device Library. In Configuration manager, drag the PRO2 from the Control Systems folder of the Device Library and drop it in the upper pane of the System Views. The PRO2 with its associated communication ports is displayed in the System Views upper pane. PRO2 System Views The System Views lower pane displays the PRO2 system tree (refer to the following graphic). This tree can be expanded to display and configure the communication ports. Expanded PRO2 System Tree C2Net-Device Slot in Configuration Manager To incorporate an ST-PC into the system, drag the ST-PC from the Cresnet Control Modules | Cresnet Power Control Modules folder of the Device Library and drop it in System Views. The PRO2 system tree displays the ST-PC in Slot 9, with a default Net ID of 2C as shown in the following illustration. NOTE: The first ST-PC in a system is preset with a Net ID of 2C when its symbol is dragged into the upper pane of System Views. Additional ST-PC units are assigned different Net ID numbers as they are added. 10 · Dual AC Power Control Module: ST-PC Operations Guide ­ DOC. 5708A Crestron ST-PC C2Net Device, Slot 9 Dual AC Power Control Module Setting the Net ID in Device Settings Double-click the ST-PC icon to open the "Device Settings" window. This window displays the ST-PC device information. If necessary, select the Net ID tab to change the Net ID as shown in the following figure. ST-PC "Device Settings" Window NOTE: SIMPL Windows automatically changes the Net ID values of a device added to a program if a duplicate device or a device with the same default Net ID already exists in the program. Always ensure that the hardware and software settings of the Net ID match. For Net ID hardware setting details, refer to "Identity Code" on page 7. Operations Guide ­ DOC. 5708A Dual AC Power Control Module: ST-PC · 11 Dual AC Power Control Module ST-PC Symbol in Programming Manager Crestron ST-PC Programming Manager is where programmers "program" a Crestron control system by assigning signals to symbols. The following graphic shows the ST-PC symbol in the SIMPL Windows' Programming Manager. ST-PC SIMPL Windows Symbol The ST-PC provides two discrete AC sockets. The <pwr> inputs supply power to a device for as long as the input is high; when a <pwr> input goes low AC power to the device is turned off. The <press> outputs go high whenever the corresponding push button on the ST-PC is pressed. Device Extenders To facilitate network functions and diagnostics, SIMPL Windows provides two device extenders for the ST-PC. The Poll Manager and The Poll Manager (2 Series Extended) symbols are device extenders for plug-in control cards and for Cresnet devices and touchpanels. The Poll Manager takes the device on and offline without need to physically disconnect it from the network, and reports the current connection status of the device. [. . . ] Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N. J. , or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. Return freight charges following repair of items under warranty shall be paid by CRESTRON, shipping by standard ground carrier. [. . . ]