User manual CRESTRON ST-VC

[. . . ] This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON Crestron ST-VC Volume Control Module Contents Volume Control Module: ST-VC 1 Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Functional Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] NOTE: VT Pro-e is a Windows compatible software package for creating Crestron touchpanel screen designs. The method for changing the unit's NET ID is identical regardless of the software chosen. Complete the following steps to change the NET ID. Attach one of the ST-VCs to the control system (verify that the software is running). From the SIMPL Windows or VT Pro-e menu, select Tools | Viewport to open the Crestron Viewport. From the Viewport menu, select Functions | Set Network ID. The software checks the baud rate and then opens the "Set Network ID" window. In the "Set Network ID" window, select the ST-VC from the Current Network Devices text window. From the Choose the new network ID for the selected device (Hex): text box, select the new NET ID for the ST-VC. 4. 5676A Volume Control Module: ST-VC · 7 Volume Control Module 6. 9. Crestron ST-VC Click Set ID to initiate the change. This will display the "ID command has been sent" window. In the "Command Complete" window, click OK. In the Current Network Devices text window, verify the new NET ID code. In the "Set Network ID" window, click Close. NOTE: The new NET ID code may also be verified by selecting Diagnostic | Report Network Devices in the Viewport (alternately, select F4). Repeat this procedure for each ST-VC to be added to the network. Programming The ST-VC can be programmed using various Crestron tools. Crestron AppBuilder and SIMPL Windows define and set up the functions and actions appointed by the control system. The control system interprets the button presses on the touchpanel, carries out the command, and provides feedback to the touchpanel. The AppBuilder and SIMPL Windows are intended for users with different levels of programming knowledge. The flexibility of each tool is proportional to the degree of programming expertise (i. e. , the more flexible, the more a programmer needs to know and account for). Of course, one can initiate programming using the easiest method (Crestron AppBuilder) and use advance techniques that are available from SIMPL Windows to customize the job. Programming with the Crestron AppBuilder Easiest method of programming that by itself does not offer the greatest amount of flexibility. The Crestron AppBuilder offers automatic programming for such residential and commercial applications as audio distribution, home theater, video conferencing, and lighting. [. . . ] Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. Return freight charges following repair of items under warranty shall be paid by CRESTRON, shipping by standard ground carrier. In the event repairs are found to be nonwarranty, return freight costs shall be paid by the purchaser. 2. 3. CRESTRON Limited Warranty CRESTRON ELECTRONICS, Inc. [. . . ]