User manual CRESTRON STRFGWX

[. . . ] Crestron STRFGWX Two-Way RF Transceiver Operations Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2001 Crestron Electronics, Inc. Crestron STRFGWX Two-Way RF Transceiver Contents Two-Way RF Transceiver: STRFGWX 1 Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Functional Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Complete the following steps to set the RF channel. Attach one of the STRFGWXs to the control system (verify that the software is running). From the SIMPL Windows or VT Pro-e menu, select Tools | Viewport to open the Crestron Viewport. From the Viewport menu, select Functions | Set RFGWX Channel. The software checks the baud rate and then opens the "RFGWX Channel ID" dialog box. In the top-portion of the "RFGWX Channel ID" dialog box, select the NET ID of the STRFGWX that requires the RF channel set. In the bottom-portion of the "RFGWX Channel ID" dialog box, select the desired RF channel then click OK. In the "Success" window, click OK. From the Viewport menu, select Diagnostics | Report Network Devices and verify that the unit has the desired RF channel. Repeat this procedure for each STRFGWX to be added to the Cresnet system. 4. 8. 8 · Two-Way RF Transceiver: STRFGWX Operations Guide - DOC. 5811A Crestron STRFGWX Firmware Upgrade Two-Way RF Transceiver To upgrade the firmware of the STRFGWX, a local PC that contains the Crestron Viewport (available in SIMPL Windows or VT Pro-e) is required. To connect the PC to the control system, refer to the "Obtaining Communications" section of the Operators Guide supplied with the appropriate control system. The latest version of the Operations Guides can be obtained from the Downloads page (MANUAL Library) of Crestron's website (www. crestron. com). New users are required to register in order to obtain access to the FTP site. Firmware upgrade files are obtained from the What's New page (Touchpanels section) or the Downloads page (TOUCHPNL and UPGRADES Libraries) of Crestron's website. There have been two releases of STRFGWX firmware 1. 5. 0, PIC Ver 15 and 1. 66 PIC Ver 19. Both versions may be directly upgraded to [2. 4. 1] PIC Ver 22. To upgrade the STRFGWX firmware, complete the following steps. CAUTION: To utilize firmware upgrade files, a STRFGWX with a firmware version earlier than 1. 5. 0 must be returned to Crestron. Refer to "Merchandise Returns / Repair Service" on page 16 for further information. Do NOT attempt to upgrade those firmware versions. [. . . ] CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. Return freight charges following repair of items under warranty shall be paid by CRESTRON, shipping by standard ground carrier. In the event repairs are found to be non-warranty, return freight costs shall be paid by the purchaser. 2. 3. CRESTRON Limited Warranty CRESTRON ELECTRONICS, Inc. warrants its products to be free from manufacturing defects in materials and workmanship under normal use for a period of three (3) years from the date of purchase from CRESTRON, with the following exceptions: disk drives and any other moving or rotating mechanical parts, pan/tilt heads and power supplies are covered for a period of one (1) year; touchscreen display and overlay components are covered for 90 days; batteries and incandescent lamps are not covered. [. . . ]