User manual CRESTRON STX-1700CXPW

[. . . ] Crestron STX-1700CXPW Wall Mount 2-Way RF Wireless Touchpanel Operations Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2004 Crestron Electronics, Inc. Crestron STX-1700CXPW Wall Mount 2-Way RF Wireless Touchpanel Contents Wall Mount 2-Way RF Wireless Touchpanel: STX-1700CXPW 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Functions and Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The Crestron SystemBuilder then programs the system, including all touchpanel projects and control system logic. 18 · Wall Mount 2-Way RF Wireless Touchpanel: STX-1700CXPW Operations Guide - DOC. 6249A Crestron STX-1700CXPW Wall Mount 2-Way RF Wireless Touchpanel Crestron SystemBuilder is fully integrated with Crestron's suite of software development tools, including SIMPL Windows, VT Pro-e, Crestron Engraver, Crestron Database, User IR Database, and User Modules Directory. Crestron SystemBuilder accesses these tools behind the scenes, enabling you to easily create robust systems. Programming with SIMPL Windows NOTE: The following assumes that the reader has knowledge of SIMPL Windows. If not, refer to the extensive help information provided with the software. NOTE: In the following description, the PRO2 control system is used. NOTE: The STX-1700CXPW can operate as a wired panel when set correctly in the SIMPL program. This is recommended to troubleshoot the program code and to eliminate wireless/RF configuration issues before running the program in wireless mode. SIMPL Windows is Crestron's software for programming Crestron control systems. It provides a well-designed graphical environment with a number of workspaces (i. e. , windows) in which a programmer can select, configure, program, test, and monitor a Crestron control system. SIMPL Windows offers drag and drop functionality in a familiar Windows® environment. This section describes a sample SIMPL Windows program that includes an STX-1700CXPW. Configuration Manager is where programmers "build" a Crestron control system by selecting hardware from the Device Library. In Configuration Manager, drag the PRO2 from the Control Systems folder of the Device Library and drop it in the upper pane of the System Views. The PRO2 with its associated communication ports is displayed in the System Views upper pane. PRO2 System View The System Views lower pane displays the PRO2 system tree (refer to following graphic). This tree can be expanded to display and configure the communications ports. Expanded PRO2 System Tree Operations Guide ­ DOC. 6249A Wall Mount 2-Way RF Wireless Touchpanel: STX-1700CXPW · 19 Wall Mount 2-Way RF Wireless Touchpanel Crestron STX-1700CXPW C2Net-Device Slot in Configuration Manager To incorporate an STX-1700CXPW into the system and have it operate either as a wired Cresnet device (in the wall-mount docking assembly) or as a wireless RF device (when undocked), the program needs to be designed for a dual configuration: · For a wired configuration, a back box/docking assembly (BB/DA1700CW) is required in addition to the touchpanel, to allow for the electronic docking functions, touchpanel power, and Cresnet communication. For a wireless configuration, a gateway device (TPS-RFGWX) is required to allow Cresnet communication between the touchpanel and the control system. Once the gateway is configured in the C2NetDevice Slot, the slot allows Cresnet communication. · NOTE: SIMPL Windows distinguishes between the STX-1700CXP (Cresnet) wired version, and the STX-1700CXP wireless version of the touchpanel for programming purposes. Although functionally identical, they are not interchangeable. In Configuration Manager, drag the STX-1700CXP (Cresnet) icon from the Touchpanels (Cresnet) folder of the Device Library and drop it in the upper pane of the System Views. The System Views upper pane displays the STX-1700CXP device icon below the PRO2 graphic. Drag the BB/DA-1700CW from the Cresnet Control Modules | Cresnet I/O Control & Other Modules folder and drop it in the upper pane of the System Views. [. . . ] Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. Return freight charges following repair of items under warranty shall be paid by CRESTRON, shipping by standard ground carrier. In the event repairs are found to be non-warranty, return freight costs shall be paid by the purchaser. 2. 3. CRESTRON Limited Warranty CRESTRON ELECTRONICS, Inc. [. . . ]