User manual CRESTRON TPS-1700 WBTNS

[. . . ] Crestron TPS-1700 IsysTM Wired 5. 7 Inch Tabletop Touchpanel Operations Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2002 Crestron Electronics, Inc. Crestron TPS-1700 IsysTM Wired 5. 7 Inch Tabletop Touchpanel Contents IsysTM Wired 5. 7 Inch Tabletop Touchpanel: TPS-1700 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Functions and Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] For additional information about Device Extenders, refer to the latest version of the Crestron SIMPL Windows Symbol Guide (Doc. 6120), or the on-line help included with SIMPL Windows. Example Program An example program for the TPS-1700 is available from the Crestron FTP site (ftp://ftp. crestron. com). Select the Examples folder and search for TPS-1700. ZIP that contains the example program, associated files and a README. TXT file that describes the program. Programming with VisionToolsTM Pro-e VT Pro-e, a design and programming Windows-based software, permits the creation of unlimited control screen variations incorporating two and threedimensional graphics and text. A set of pages, which make up a project, can be designed for each TPS-1700 touchpanel application. Each page contains objects such as custom control graphics, two and three-dimensional buttons, sliders, and digital readouts which allow the user to interface with the control system via join numbers. Unjoined objects are not interfaced with the system and thus cannot initiate any functions. The completed and compiled project is uploaded to the touchpanel and programmed into the flash PROM via the File | Upload Project command. The touchpanel uses the programmed project until another set is uploaded from the PC. The PC may be disconnected from the control system or panel except during reprogramming. VT Pro-e also allows users the option to generate projects destined for web browsers rather than for physical touchpanels. For additional software information, refer to the help file provided with the software. The latest version of VT Pro-e can be obtained from the Downloads | Software Updates section of the Crestron website (www. crestron. com). Multi-mode objects offer highperformance programming! The single most-advanced VT Pro-e high-performance programming technique involving the TPS-1700 is the concept of multi-mode objects. A multi-mode object (i. e. , button, legend, etc. ) is an object drawn on a VT Pro-e page that can have one or more active and inactive visible settings (modes). For examples, refer to the MULT-MOD. ZIP file. It is available from the Crestron FTP site <ftp://ftp. crestron. com>. This file contains the VT Pro-e touchpanel files and SIMPL Windows files that illustrate the highperformance capabilities of multi-mode objects. Operations Guide - DOC. 6117 IsysTM Wired 5. 7 Inch Tabletop Touchpanel: TPS-1700 · 15 IsysTM Wired 5. 7 Inch Tabletop Touchpanel "Quick" Pushbuttons Pushbutton Layout and Join Number Assignment 1 6 Crestron TPS-1700 Ten "quick" pushbuttons flank the LCD display. You can use these buttons to access any frequently used commands. Each button has a permanently fixed digital join number; refer to the illustration shown to the left. The sequence of digital join numbers is (top to bottom) 1 through 5 on the left side and 6 through 10 on the right side. NOTE: A VT Pro-e sample project, TPS-1700. VTP, is available from the Downloads page (VTPRO-E Library) of the Crestron website (www. crestron. com). This project provides guides for panel designers so that they can line up objects with the 10 "quick" pushbuttons that flank the LCD display. [. . . ] Authorized returns must be shipped freight prepaid to CRESTRON, Cresskill, N. J. , or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. Return freight charges following repair of items under warranty shall be paid by CRESTRON, shipping by standard ground carrier. [. . . ]