User manual CRESTRON WMKB-1000L

[. . . ] Conveniently, each bag contains a template, two brackets, and four screws to mount one touchpanel. Contents of WMKB-1000L ITEM Mounting Bracket Pan Phillips Screw, #4-40 x 1" Template PART # 4001193 2007186 2005025 QUANTITY 20 (or 2 per bag) 40 (or 4 per bag) 10 (or 1 per bag) Mounting Procedure The Series 1000 touchpanel is a low-voltage unit that can be installed directly into a mounting surface. Each touchpanel utilizes the mounting hardware provided in a single bag from the WMKB-1000L. Complete the following mounting procedure in the order provided. The only tools required are masking tape (or equivalent), a gypsum board saw (or equivalent), and a #2 Phillips tip screwdriver. [. . . ] Install the plastic buttons by firmly pressing them into place. If buttons are engraved, be sure to match button engraving with button functionality. 10. Firmly press on the plastic cover over the touchpanel (refer to illustration after this step). NOTE: If necessary, refer to the latest revision of the Series 1000 Operations Guide (Doc. 5813) for a touchpanel removal procedure. 2 · Wall Mount Bracket Kit: WMKB-1000L Installation Guide - DOC. 6283 Wall Mount Bracket Kit Crestron WMKB-1000L Secure Mounting Bracket/Touchpanel Assembly and Add Plastic Buttons and Cover Further Inquiries If after reviewing this Installation Guide, you cannot locate specific information or have questions, please take advantage of Crestron's award winning customer service team by calling: · · · · · In the US and Canada, call Crestron's corporate headquarters at 1-888-CRESTRON [1-888-273-7876]. In Europe, call Crestron International at +32-15-50-99-50. In Asia, call Crestron Asia at +852-2341-2016. In Latin America, call Crestron Latin America at +5255-5093-2160. In Australia and New Zealand, call Crestron Pacific at +613-9480-2999. Installation Guide - DOC. 6283 Wall Mount Bracket Kit: WMKB-1000L · 3 Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. Products may be returned for credit, exchange, or service with a CRESTRON Return Merchandise Authorization (RMA) number. Authorized returns must be shipped freight prepaid to CRESTRON, 6 Volvo Drive, Rockleigh, N. J. , or its authorized subsidiaries, with RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be subject to refusal. CRESTRON reserves the right in its sole and absolute discretion to charge a 15% restocking fee, plus shipping costs, on any products returned with an RMA. Return freight charges following repair of items under warranty shall be paid by CRESTRON, shipping by standard ground carrier. In the event repairs are found to be non-warranty, return freight costs shall be paid by the purchaser. 2. 3. CRESTRON Limited Warranty CRESTRON ELECTRONICS, Inc. [. . . ] Any implied warranties that may be imposed by law are limited to the terms of this limited warranty. This warranty statement supercedes all previous warranties. Trademark Information All brand names, product names, and trademarks are the sole property of their respective owners. Windows is a registered trademark of Microsoft Corporation. Windows95/98/Me/XP and WindowsNT/2000 are trademarks of Microsoft Corporation. Crestron Electronics, Inc. [. . . ]