User manual CUISINART CBM-18

[. . . ] Remove grind chamber by pulling toward you. Remove the burr grinder, once the bean hopper has been removed, by grasping the metal handle and lifting up. Use the brush to remove grinds or wash by hand. Replace the burr grinder onto the unit and rotate until the piece is fully inserted. [. . . ] The retail store shall then, according to its preference, either repair the product, refer the consumer to an independent repair facility, replace the product, or refund the purchase price less the amount directly attributable to the consumer's prior usage of the product. If the above two options do not result in the appropriate relief to the consumer, the consumer may then take the product to an independent repair facility if service or repair can be economically accomplished. Cuisinart and not the consumer will be responsible for the reasonable cost of such service, repair, replacement, or refund for nonconforming products under warranty. California residents may also, according to their preference, return nonconforming products directly to Cuisinart for repair or, if necessary, replacement by calling our Consumer Service Center toll-free at 800-726-0190. Cuisinart will be responsible for the cost of the repair, replacement, and shipping and handling for such nonconforming products under warranty. BEFOrE rETurNiNg YOur CuisiNarT PrODuCT important: If the nonconforming product is to be serviced by someone other than Cuisinart's Authorized Service Center, please remind the servicer to call our Consumer Service Center to ensure that the problem is properly diagnosed, the product serviced with the correct parts, and to ensure that the product is still under warranty. ©2008 Cuisinart Cuisinart® is a registered trademark of Cuisinart 150 Milford Road, East Windsor, NJ 08520 Printed in China 08CU341 IB-8304 Programmable Conical Burr Mill CBM-18 IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. To protect against risk of electrical shock, do not immerse cord, plug or grinder in water or other liquid. Close supervision is necessary when any appliance is used by or near children. uNPLug FrOm OuTLET WhEN NOT iN usE, BEFOrE PuTTiNg ON Or TakiNg OFF ParTs, BEFOrE rEmOviNg COFFEE aND BEFOrE CLEaNiNg. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized Cuisinart service facility for examination, repair, or mechanical or electrical adjustment. The use of attachments not recommended or sold by Cuisinart may cause fire, electrical shock, or risk of injury. Do not let cord hang over edge of table or counter, or touch hot surfaces. Before using, check hopper for presence of foreign objects. Use this appliance to grind roasted coffee beans only. Grinding other substances, such as nuts, spices or unroasted beans, may dull the blade and cause poor grinding or injury. Do not use appliance for other than intended use. Do not place this appliance on or near a hot gas or electric burner, or in a heated oven. SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY NOTICE This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way. INTRODUCTION The next generation of coffee grinders has arrived to deliver the new standard in home-ground coffee!The conical burrs grind the beans with precise uniformity while maintaining the full flavor of the coffee bean. [. . . ] Wait approximately 2 minutes for your grinder to cool off; when the HHH is no longer displayed, resume use. Grinding will automatically stop upon completion. Note: to pause or cancel operation during use, see below. Pull the grind chamber toward you to remove from unit. [. . . ]