User manual CUISINART CBT500E

[. . . ] With a timer and a Pulse PULSE function, the blender guarantees precision work and is uniquely comfortable to use. Every recipe can be followed to the second. Before using the appliance, it is recommended you wash the measured pour lid, the cover, the jar and the locking ring. The blades are extremely sharp : wash them very carefully while holding them by the central hub. [. . . ] Then push and release the or button as desired. I Every time you push the button, the LED lights for each of the mode, the PULSE or the selected setting will flash. Crushing Ice The Cuisinart® blender has a 600W motor that allows you to crush ice without adding liquids. to guarantee greater control , the function operates intermittently like PULSE function. Put the ice cubes in the jar, replace the I the cover and push the button. Now push the button in short bursts until the ice is the desired consistency. Dislodging Food Use a spatula only when the blender is off and unplugged. Remove the food stuck to the sides of the jar and put them on top of the blades. Never use metal utensils because The blender is now in standby and ready to be used. I To use the pulse function, press the button while in PULSE mode, then press and release the chosen function as often as necessary. To crush ice, while the machine is in I mode, press and release the button as often as necessary. To turn the machine off, push the button. Add all the necessary ingredients and put the cover on It is also possible to put the cover on and add ingredients by removing the measured lid and adding the ingredients through the opening. Additional ingredients can also be added through the same opening while blending. Timing preparation The timer displays blending time from 0 to 5 minutes on the digital display counting in seconds from 0. It starts timing as soon as the PULSE and/or or buttons are pushed. The displayed time pauses once these same buttons are pushed and continues when the button is pushed again. The timer resets to 0 when the blender is turned off. The timer stops automatically after five minutes of use. Then replace the cover and continue blending if necessary. Never turn the blender on when the spatula is in the jar. Then lift the jar from the motor base to remove it. [. . . ] Always put the motor base on a level surface that is stable, clean and dry. Unplug the appliance after use, before assembling or dismantling, before removing food and before cleaning. never leave the appliance plugged in and unattended. To unplug, pull on the plug, never on the cord. [. . . ]