User manual CUISINART DGB-900BC

[. . . ] INSTRUCTION BOOKLET Fully Automatic Burr Grind & BrewTM Thermal Coffeemaker DGB-900 Series For your safety and continued enjoyment of this product, always read the instruction book carefully before using. ImporTAnT SAFeGuArdS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock and/or injury to persons, including the following: 1. To protect against electric shock, do not place cord, plug, or base unit in water or other liquids. This appliance should not be used by or near children or individuals with certain disabilities. Always unplug from outlet when not in use and before cleaning. [. . . ] Fill the Water Reservoir Open the reservoir lid. Pour the desired amount of water in the reservoir using the water level window indicator. Doing so may cause the carafe to overflow. Add Beans Lift the hopper lid, using the recess on either side. We recommend keeping the hopper at least halfway full. Be sure that you have a sufficient amount of beans in your hopper for the amount of coffee you intend to brew (maximum capacity is ½ lb. Over-packing may result in jamming the grinder. ) For easy filling, the hopper container can be taken out by turning the hopper container release knob to the unlock position. Note: Do not put any water in the unit once the hopper container has been removed. If water gets into the grinder motor, the motor may become damaged and may malfunction. Lock Hopper If you have removed the hopper from the unit, be sure that the hopper container release knob is in the unlocked position and place the hopper container back in the unit. This unit is equipped with a safety interlock system. The unit will not grind if the hopper container is not in place. If you try to turn INSERTING THE WATER FILTER a. Remove the filter from polybag and soak in cold tap water for 15 minutes. Remove the water filter holder from the coffeemaker by lifting it out of the reservoir area with your thumb and forefinger. Using the thumb of the other hand, gently press down and pull toward you. Place the filter in the holder and close the water filter holder; you will hear a snap indicating filter is in place. NOTE: Caution must be used when inserting the charcoal filter. Improper placement in the holder can cause tearing of the filter skin. Hold the filter under cold running tap water for 10 seconds to flush. You should place the hole openings in the side of the unit directly under the water stream. Replace the water filter holder in the reservoir area of the coffeemaker, pushing it on the unit for grinding with the hopper out of place, the unit will beep continuously until the missing part is installed. The brewing process can be restarted by pressing the On button. Restarting the process will not affect coffee results. [. . . ] If your Cuisinart® Fully Automatic Burr Grind & BrewTM Thermal Coffeemaker should prove to be defective within the warranty period, we will repair it, or if we think necessary, replace it. To obtain warranty service, simply call our toll-free number 1800-726-0190 for additional information from our Customer Service Representatives, or send the defective product to Customer Service at Cuisinart, 150 Milford Road, East Windsor, NJ 08520. To facilitate the speed and accuracy of your return, please enclose $10. 00 for shipping and handling of the product. Please pay by check or money order (California residents need only supply proof of purchase and should call 1-800-726-0190 for shipping instructions). [. . . ]