User manual CUISINART DTC-850

[. . . ] Automatic Brew & Serve DTC-850 Series For your safety and continued enjoyment of this product, always read the instruction book carefully before using. IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock and/or injury to persons, including the following: 1. Read all instructions before operating or using the appliance. To protect against electrical shock, do not place cord, plugs or appliance in water or other liquid. Close supervision is necessary when any appliance is used by or near children. [. . . ] When passing 12 am, the "PM" indicator will illuminate in the lower left hand corner of the LCD screen. Press the "minute" button to advance the minutes to the desired time. When complete, press the "prog" button, or wait for 15 seconds and your set time will be accepted. To Activate the Auto Brew Cycle To activate the auto brew mode, depress the "auto on" button. The "auto" symbol will illuminate in the upper right hand corner of the LCD screen. The unit will now begin the brewing cycle at the programmed time. When the programmed time initiates the cycle, the red "ON" indicator light will show that the brewing cycle has started. NOTE: The unit will continue to attempt to brew at the programmed time, each day, until the Auto On button is turned off. The red "ON" indicator light will illuminate each time the attempt to brew is made. If there is no water in the reservoir, the unit will automatically shut off one minute later. cover; pour water into reservoir opening. Markings on water level indicator show amount of water needed to make desired number of cups of coffee. TO AVOID OVERFLOW, DO NOT FILL ABOVE 8-CUP MARK. Before thermal carafe is returned to platform, prewarm carafe by running warm water through carafe. If warm water is not run through carafe, when hot coffee flows into carafe during brewing cycle the glass liner may crack due to the temperature change. Prewarming carafe will help keep coffee warmer, and also prevent glass liner from being damaged. To close lid, turn it in direction of "CLOSE" arrow until it fits tightly on carafe, and "POUR" arrow is aligned with spout. Return empty thermal carafe to platform. Be certain thermal carafe lid is in "CLOSED" position and is securely in place during brew cycle. Open filter basket by grasping basket handle and swinging outward. Insert a filter into filter basket; make sure filter fits snugly in basket. Use a fresh filter for each carafe of coffee. After placing 2 level tablespoons per cup of ground coffee into cone filter, return basket to closed position. [. . . ] Do not place a cloth or otherwise restrict airflow beneath coffee maker. To avoid accidents, make sure thermal carafe lid is in "CLOSED" position during brewing and while pouring; do not pour in the direction of people. When pouring, use thermal carafe handle only. CAUTION: Burns may result from spilled hot liquid and/or contact with hot parts. Always unplug coffee maker and allow to cool before cleaning. [. . . ]