User manual CURTIS MATHES CMC19410

[. . . ] TV/VCR Combination Unit Owner's Manual CMC13410 CMC19410 IMPORTANT SAFETY INSTRUCTIONS Warning!Important Safety Instructions Save These Instructions Important Safety Information CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. [. . . ] For information on the record safety tab, see page 40. Picture Plus : On 4 SP 1 2 Insert a tape and press PLAY. Press P. PLUS, and "Picture Plus Off" appears on the screen. Press P. PLUS again to turn to "Picture Plus On". The Rental Picture Plus functions only when a tape is being played. If the tape is ejected and reinserted, the Rental Plus feature will be OFF. Select the television channel you want by pressing CHv or CHw or by using the number buttons. If you are using the number buttons to select the channel, press 0 before a single-digit channel number (for channel 5, press 0, 5). The record indicator on the control panel illuminates and the TV/VCR begins recording. The TV/VCR automatically stops recording when it reaches the end of the tape. Press STOP at any time to stop recording. Don't change tape speeds while recording; this may cause picture distortion during playback. 2 The tape speed appears in the lower left corner of the screen. Press SPEED repeatedly until the speed you want (SLP, SP) appears. SP (Standard Play) is the most common speed for recording. For more information on tape speeds, see page 40. When you finish recording, rewind the tape and remove it from the TV/VCR. CHAPTER FOUR: VCR OPERATION 25 VCR OPERATION Recording TV Programs as You Watch, continued Editing While Recording You can edit while recording, selecting only those scenes you want to record from the current television program. This is especially helpful if you want to record a program without commercials. 1 Be sure you have begun recording and that the record indicator light on the front panel is lit. 2 Press P. /STILL to temporarily stop recording. After ten minutes in pause mode, the TV/VCR stops the tape automatically and switches to TV mode to protect the video heads. If this happens, press REC to resume recording. 3 To resume recording, press P. /STILL again. Using Advanced Recording Features One-touch Recording One-touch Recording (OTR) lets you record television programs with the touch of a button. You can program the length of time (up to four hours) that you want to record. 1 Insert a video cassette tape, set the tape speed, and select the channel you want to record. The TV/VCR won't record if the record safety tab on the tape has been removed. For more information, see page 40. 3 2 Press REC on the remote control twice. Record 30M Press REC on the remote control repeatedly until the time you want appears. You can increase the length of time you want to record at any time during the recording process by pressing the REC button again and choosing additional time. If you want to stop recording before the time is up, press the REC button until the OTR display shows "Stop. " The recording stops after a few seconds. You can also press STOP/EJECT on the front panel. Timer Recording You can set the timer to record up to six different programs. [. . . ] 5watts when off CMC19410 120V AC, 60Hz Approx. 5watts when off 486 x 468 x 487 mm Dimensions(w x d x h) 366 x 382 x 381 mm 14. 41 x 15. 04 x 15. 00 inches 19. 13x 18. 43 x 19. 17 inches Weight 11. 2kg ; 24. 69lbs 19kg ; 41. 89lbs 40 APPENDIX Curtis Mathes Color Television LIMITED WARRANTY TO ORIGINAL PURCHASER This Curtis Mathes brand product, as supplied and distributed by Curtis Mathes and delivered new, in the original carton to the original consumer purchaser, is warranted by Curtis Mathes against manufacturing defects in materials and workmanship for a limited warranty period of: Ninety (90) Days Labor and One (1) Year Parts and Two (2) Years Warranty for Picture Tube (CRT) This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must contact Curtis Mathes for determination of problem and service procedures. Warranty service can only be performed by a Curtis Mathes authorized service center. [. . . ]