User manual CURTIS DVD5045

[. . . ] DVD RECEIVER SYSTEM Operating Instruction Manual DVD5045 DVD RECEIVER SYSTEM Built-in Dolby Digital decoding for maximum home entertainment enjoyment Unique laser-head over-current protection system doubles service life Special DVD deck features fully dust proof and anti shock design as well as augmented error correction and better stability Fully functional DVD operating system offers many favorite functions and user-friendly operation Integrated DVD and built-in 6-channel Hi-Fi amplifier MAN-DVD5045 PRECAUTIONS A lightning bolt with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and main tenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO AVOID THE DANGER OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. NEVER OPEN THE CABINET, AS DANGEROUS HIGH VOLTAGES ARE CONTAINED INSIDE. [. . . ] CHANNEL DELAY Follow the operation instructions stated in DVD menu setup in combination with desired option in the following figure. CHANNEL DELAY PAGE CENTER LS RS SUBWOOFER 0CM 170CM 170CM 0CM AUDIO SETUP SET LPCM SPDIF OUTPUT RATE DOLBY DIGITAL SETUP Dolby digital setup includes dual mono and dynamic range compress. STEREO SETUP Follow the operation instructions stated in DVD menu setup in combination with desired option in the following figure. DOLBY DIGITAL SETUP DUAL MONO DYNA MIC STEREO L-MONO R-MONO MIX-MONO AUDIO CENTER SETUP 25 26 27 28 29 30 31 32 33 34 Note: the longest distance is 510 cm. 3D PROCESS SETUP Includes PRO LOGIC, virtual surrounds, reverb mode. PROLOGIC SETUP Follow the operation instructions stated in DVD menu setup in combination with desired option in the following figure. 3D PROCESSING PAGE PRO LOGIC V SURR REVERB MODE ON OFF MULTI 35 36 37 38 39 AUDIO SETUP DUAL MONO (1+1) SETUP 40 If you have Dolby digital input in your amplifier/decoder, you may select stereo. Left, right and mixed sound accordingly. DYNAMIC RANGE COMPRESS Follow the operation instructions stated in DVD menu setup in combination with desired option in the following figure. 41 MEMO (memory/rewind skip) 42 AUDIO PRO LOGIC SETUP PRO LOGIC is set to ON , OFF or MULTI. VIRTUAL MODE Follow the operation instructions stated in 22 7 OPERATING THE REMOTE CONTROL Battery Installation 1. Push down and out on the battery Compartment cover to remove it. Insert the two " AAA " batteries into the battery compartment of the remote control, making sure the + and - signs on the batteries and inside the battery compartment match up. Notes: Do not mix batteries from different manufacturers, nor old ones with new. If the remote control will not be used for an extended period of time, remove the batteries to prevent damage-causing corrosion. Remove dead batteries immediately to prevent damage-causing corrosion. If battery leakage occurs, wipe the battery liquid from the battery compartment, then replace both batteries. Always replace both batteries at the same time, using new, fully charged batteries. Life expectancy of batteries may vary depending on amount of use. Notes: Do not direct the remote sensor toward any light source, such as direct sunlight or a strong fluorescent light, as it may cause the unit to not operate correctly. When other remote controls are used nearby or when the remote is used near equipment using infrared rays, interference may occur. Placing an object on the remote control may cause it to inadvertently depress a button, changing a function and shortening battery life. Do not glaze the front of the DVD receiver with colored glass, as it may cause interference with normal operation of the controller. [. . . ] 2. Press UP or DOWN button to find a station. The frequency will change with each press. When a station's signal is received, it will appear in the display. 3. To lock onto a station quickly, hold the UP or DOWN button for two seconds. [. . . ]