User manual CURTIS RCD951

[. . . ] Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. . Power Sources - The product should be operated only with the type of power supply indicated on the marking label. Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 7. Nonuse periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. [. . . ] Do not place the disc on other equipment or near anyheat source. CD SECTION Playing a CD This CD-player can play Audio Discs, CD-R. Do not try to play CD-ROM, VCD, DVD or computer CD. Adjust the TAPE/AUX/RADIO/CD selector to CD. Display: shows " - -" Briefly. To open the CD door, lift the CD door at the edge marked OPEN/CLOSE. Insert a CD disc with the printed side facing up and press the CD door gently close. Press PLAY/PAUSE on the set to start playback. To pause playback press PLAY/PAUSE while playing. Note: CD play will also stop when: you open the CD compartment; 6 you select RADIO sound source; the CD has reached to the end. During playback you can use F. FWD or REW to select a particular track. If you have selected a track number in the stop or pause mode, press PLAY to start playback. Press F. FWD once briefly for the next track, or press repeatedly until the desired track number 4. Press REW once briefly to return to the beginning of current track. Press REW more than once briefly for a previous track. Finding a passage within a track 1. The CD is played at high speed and low volume. When you recognize the passage you want, release F. FWD or REW . Normal playback resumes. Repeat Function The Repeat Button can be used to repeat a single track. Press the REPEAT Button once while in the play mode . The CD Repeat LED Indicator will flash. To repeat all of the tracks on a CD. Press the REPEAT Button twice while in the play mode. The CD Repeat LED Indicator will steadily be illuminated. Press the REPEAT Button a third time while in the play mode. RANDOM PLAY In CD stop mode, Press the "RANDOM" BUTTON once, the CD will play randomly. [. . . ] To stop recording , simply press the STOP Button to stop the cassette player. AUX INPUT JACK 1. Adjust the TAPE/ AUX/ RADIO/ CD selector to "AUX". Connect the AUX connect wire (not included) from the out jack of your Personal Player such as 3. portable MP3 player to the AUX input jack. [. . . ]