User manual CURTIS SRCD856

[. . . ] 12 Unplug this apparatus during lightning storms or when unused for long periods of time. 13 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, unit has been exposed to rain or moisture, does not operate normally, or damaged, or has been dropped. 14 This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on the apparatus. TABLE OF CONTENTS This instruction manual is important to you. [. . . ] Tune a desired station by rotating the TUNING control. Adjust the VOLUME control and BASS BOOST button as desired. CD OPERATION CD OPERATION The CD changer in this system can play up to 3 CDs in succession to provide you with over three hours of uninterrupted music. When the first CD ends the second CD begins automatically. When all 3 CDs have finished the changer stops. In addition to normal playback of up to 3 CDs you may program up to a total of 32 tracks on the 3 discs to playback in any specific order you choose. You may also use the REPEAT function to repeat a single track, repeat all tracks on a single disc, or repeat all tracks on all the discs in the changer. The LCD display provides all the information about the operation of the CD changer. A) ALL DISC------------------This indicates that the changer is in the normal operation mode and that it will play all tracks on all the discs in the tray in numerical order. B) PROGRAM---------------- This indicates that the changer is in the programmed playback mode and will play selected tracks on selected discs in the order in which they were programmed. C) REPEAT INDICATORS--Show which of the 3 repeat modes has been selected. Refer to the instructions for repeat playback. D) DISC INDICATORS-----These indicators show the number of discs which are loaded in the changer. The indicator blinks to show which disc is playing or in the play position. If the changer checks all 3 disc pockets and finds no discs the display will indicate NO DISC. E) TRACK NUMBER-------- Shows the total number of tracks on the disc when the disc is stopped and shows the track number being played during playback. F) TIME DISPLAY----------- Shows the total playing time of the disc when the disc is stoped and shows the elapsed time in minutes and seconds of the track which is being played. G)PLAY INDICATOR-------- Comes on when a disc is playing. H)PAUSE INDICATOR----- Comes on, together with the play indicator, when the disc is in the pause mode. Goes off when the pause mode is canceled. NORMAL CD PLAYBACK 1 Press POWER button to turn the system on. 2 Set the FUNCTION selector to the CD position. The CD display lights and the changer begins to search all three disc pockets for CDs. If no discs are found the display indicates NO DISC. [. . . ] Continue pressing the PROGRAM button and the display will show each programmed step in the order that they were entered into the memory. After you have confirmed that you programmed the memory correctly, press the PLAY/PAUSE button to begin programmed playback. CARING FOR COMPACT DISCS Treat the disc carefully. Never allow your fingers to come in contact with the shiny, unprinted side of the disc. Do not attach adhesive tape, stickers, etc. [. . . ]