User manual CURTIS TID877

[. . . ] SWITCH (BASS BOOS SWITCH) HOLD SWITCH PREPARATIONS BEFORE USING Battery Installation 1. Insert 2 batteries (LR6, "AA" size, or equivalent) in the correct polarity as indicated. (Batteries not included) (Heavy duty batteries are recommended. ) 3. Repeat steps 1 to 3 to store a radio station into the rest of the Preset Memories. Press the BAND BUTTON for the AM or FM radio band. [. . . ] NOTES - The headphone cord works as a FM antenna. To insure maximum FM tuner sensitivity, always keep the headphone cord fully extended. Do not wind or fold the headphone cord while listening to the radio. - When tuning in AM reception, be sure to place the unit in a horizontal position. For maximum AM sensitivity, keep turning the unit slowly while keeping it horizontal until the best reception is obtained. During PLAY mode · Press the MODE button twice to play the entire disc repeatedly. · The repeat indicator will appear in the display. NOTE - To cancel REPEAT simply press the MODE button until the repeat indicator disappears. Intro Scan In STOP mode · Press the MODE button three times. · The INTRO indicator will appear in the display. · Press the PLAY button to play the first 10 seconds of each track on the disc. NOTE To cancel INTRO SCAN simply press the MODE button until the INTRO indicator disappears. AC Power Adaptor 1. Close the door and press the Play/Pause Button once. The Display will show the total number of tracks of the disc, then begin to play the first track. 5 4 12 13 14 15 3 2 1 B A ND M D Y N A M IC + C. Random Play In STOP mode · Press the MODE button four times. · The SHUF indicator will appear in the display. · Press the PLAY button, all the tracks on a disc to be played in a random sequence. NOTE - To cancel RANDOM PLAY simply press the MODE button until the SHUF indicator disappears. BAS S BO O ST SY ST EM OD E O. P RO G ME M. + _ . Press the PROG button when the unit is in the stop mode until PROG show on the display. * The PROG indicator flashing appears on the display. Press the PROG button to enter the track into memory. The program numbers which will be increment one step. Repeat step 2 and 3 to program the order of more tracks can be programmed into memory. [. . . ] Repeat step 2 and 3 to program the order of more tracks can be programmed into memory. To erase the program, open the door or turn off the power. _ General Operation Play/Pause Buttons Stop Button -- Press once to start playback in the original order. Press again to stop the disc play temporarily. Press again to turn off power -- Press once to skip to next track or back to previous track . [. . . ]