User manual CYBEX PALLAS

[. . . ] For maximum protection and best comfort for your child, it is essential to read and follow the entire instruction manual carefully. Thank you for purchasing the CYBEX Pallas. We assure you that in the process of developing the CYBEX Pallas we focused on safety, comfort and user friendliness. The product is manufactured under special quality surveillance and complies with the strictest safety requirements. [. . . ] Remove the seat inlay according to the above age recommendation. Put the seat cover back in its original position and fasten the press buttons. 11 Safety cushion ADJUSTMENT - ECE GROUP 1 (9-18 KG) By pushing the buttons (z) the safety cushion (p) will slide into the forefront position. By releasing the buttons (z) the safety cushion (p) will be locked in position. The side parts of the safety cushion (p) fit exactly into the armrests of the booster cushion. They connect the safety cushion (p) and the booster (d). The safety cushion should be well adjusted to touch the child‘s chest without exerting any pressure on the child`s body. Safety cushion (p) may only be used in conjunction with the main frame (w) and only up to a mximum weight of 18kg!SITTING AND RECLINING POSITION – ECE GRoup 1 (9 - 18 KG) It is not necessary to open the car belt system (f), to bring the CYBEX child seat into reclining position. €– When the child is about to fall asleep, pull the handle (v) and the seat slides down automatically. €– When the child is no longer in the seat you can move the seat into an upright position by again pulling the handle (v) and slightly pressing against the booster. Make sure that the handle (v) of the reclining mechanism is audibly locked in any position. The reclining position is only approved for ECE Group 1 (9-18 kg), in conjunction with main frame (w) and safety cushion (p)!RECLINING HEAD REST The CYBEX Pallas has a reclining headrest (r) preventing your child‘s head from falling forward when asleep. Furthermore, this adjustable headrest contributes to the comfort of your child during the car ride. Please ensure that the child‘s head always remains in contact with the reclining headrest since otherwise the headrest cannot fulfill its optimal side-crash protective function. By slightly lifting the headrest, the inclination of the headrest (r) can be adjusted in three different positions. The locking device (t) must never be blocked by any objects!In case of an accident, the free movement of the inclination must be guaranteed since otherwise your child might be injured. V a w d q s 13 Fastening of seatbelt with safety cushion attached - ECE group 1 (9-18 kg) 1. Attach the previously adjusted safety cushion to the child seat (see chapter „Safety cushion adjustment“). Change over from group 1 (9-18kg) to group 2/3 (15-36 kg) 1. [. . . ] Pull the headrest (e) into top position, by using release handle (h). To release the headrest (e), simultaneously pull handle (h) and the lower rim of the upper rib of the backrest (a). Now the headrest (e) can be completely detached. For reassembly pull the adjustment handle (h) and insert the headrest (e) into the backrest (a). [. . . ]