User manual CYBEX RUBY

[. . . ] wARNING: THIS PRODUCT IS NOT SUITABLE FOR RUNNING OR SKATING. ­ To attach an additional full harness system for safety reasons `D' rings (according to EN13210 or BS6684) are provided. ­ The child should be clear of any moving parts while making adjustments. Prevent children from grabbing the stroller while folding and unfolding, as fingers can become trapped and scissoring actions are unavoidable. [. . . ] If the stroller is wet, allow to dry with the hood extended. Never store in a damp environment as this can cause mildew to form. Please wash the cover separately before you use it the first time. Do not tumble dry and do not expose to direct sunlight!This product was approved according to the EN 1888:2003 + A1/A2/A3:2005 standard. SERVICE In general the Cybex pushchairs will run smooth without any problems. A dry and/ or dusty environment can have a negative effect on the wheel systems. To avoid this it is very important that the wheel systems will be regularly checked, cleaned and lubricated. this will ensure a smooth operation of the stroller in daily use. Please follow the instruction below to maintain the wheel systems (wheel axles & suspension system). -I Check of wheel systems a) Wheel system must be cleaned before applying the lubricant. B) Wheel system must not be broken or damaged. For eliminate squeaking on you CYBEX buggy take only WD 40 and follow the mentioned pictures below. Insert always a cloth or a carton in order to leave no oil stains. Please pay special attention to not apply the lubricant on any other part of the stroller (fabrics, tubes, etc. -II Applying of the lubricant a) Rear Wheel Spray from the rear side of the buggy in the space between the rim and the housing on both sides. let the lubricant get into the system for approx. B) Front Wheel Spray in the space between the rim and the housing on both sides. let the lubricant get into the system for approx. should this not avoid the squeaking , please remove the rim cap and apply the spray on the axle. C) Suspension Apply some lubricant between the suspension slider and the housings. DISPOSAL When you are done using your CYBEX RUBY, a proper disposal is important. [. . . ] This warranty shall not apply in the event that this product is taken or shipped to the manufacturer or any other person other than the retailer who initially sold this product to a consumer. Please check the product with respect to completeness and manufacturing or material defects immediately at the date of purchase or, in the event that the product was purchased in distance selling, immediately after receipt. In case of a defect stop using the product and take or ship it immediately to the retailer who initially sold it. In a warranty case the product has to be returned in a clean and complete condition. [. . . ]