User manual CYBEX SOLUTION M-FIX

[. . . ] Without the approval of the certification office, the child car seat may not be modified or added to in any way. Repairs may only be performed by person authorised to this effect. Only original parts and accessories may be used for repairs. Failure to comply with the above will result in the protective function of the child car seat no longer being guaranteed. [. . . ] Note the information in the section “PLACING THE SEAT IN THE VEHICLE”. ) can be extended in two steps by pressing the L. Together with the initial position, this provides a total of three different L. On the side of the seat facing the car door. ADAPTING TO BODY SIZE • The seat can then be adjusted to your child’s body simply by using the adjustable headrest (e). To do this, pull the adjustment level (h) upwards to unlock the headrest (e). € Adjust it so that there is space for two fingers between the lower edge of the headrest (e) and the shoulder of the child. Only an optimally adjusted headrest (e) can offer your child maximum protection and comfort while ensuring that the diagonal belt can be fitted smoothly (f). The height of the CYBEX SOLUTION M-FIX can be adjusted to one of twelve positions. REMOVAL OF THE CYBEX SOLUTION M-FIX Perform the installation steps in the reverse order. €  nlock the ISOFIX locking arms (o) on both sides by pushing the red U release buttons (y) and pulling them back simultaneously. € Pull the seat out of the ISOFIX guides (u). € Rotate the locking arms (o) 180°. € Operate the adjustment lever (v) on the frame (d) of the CYBEX SOLUTION M-FIX and push the locking arms in as far as they will go. By folding in the locking arms (o), you are not just protecting the vehicle seat but also the locking arms of the ISOFIX Connect system from dirt and damage. 16 PLACING THE SEAT IN THE VEHICLE Place the child car seat on the appropriate seat in the car. €  lways ensure that the entire surface of the backrest (a) of the CYBEX A SOLUTION M-FIX is placed fully against the backrest of the vehicle seat. The child car seat must never be in a lying position. If necessary, you can adjust the distance using the adjustment lever (v). € If the headrest of the vehicle is in the way, pull it out all the way, turn it away or remove it completely (for exceptions to this, please refer to the section “POSITIONING THE SEAT CORRECTLY IN THE VEHICLE”) The backrest (a) will perfectly adapt to practically any recline of the vehicle seat. The full surface of the backrest of the CYBEX child car seat must be against the backrest of the vehicle. To ensure maximum protection for your child, the seat must be in a normal upright position! [. . . ] PRODUCT SERVICE LIFE The CYBEX SOLUTION M-FIX is designed to meet its specifications for the entire service life of approximately 7 years. However, as there can be very large temperature fluctuations and unpredictable strains in vehicles, the following points must be observed: • If the vehicle is directly exposed to sunlight for a longer time, the child car seat must be removed from the vehicle or covered with a light cloth. € Regularly check all plastic and metal parts of the seat for damage, deformation or change of colour. If you discover any changes, the child car seat must be disposed or checked and possibly replaced by the manufacturer. [. . . ]