User manual D-LINK AIRPLUS DWL-520+

[. . . ] D-Link AirPlus DWL-520+ Enhanced 2. 4 GHz Wireless PCI Adapter Manual Building Networks for People Contents 1. Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Wireless Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] How can I troubleshoot distance issues using the DWL-520+. · · · · · Move the DWL-520+ and the Access Point or Wireless Router into the same room and then test the wireless connection. In the Configuration Utility, click on Configuration. To use the 4x feature, you must use a 4x-enabled DWL-900AP+ Wireless Access Point or a 4x-enabled DI-614+ Wireless Broadband Router in conjunction with the 4x-enabled DWL-520+. 8. How do I use the 4x feature? 7. Networking Basics Using the Network Setup Wizard in Windows XP In this section you will learn how to establish a network at home or work, using Microsoft Windows XP. Note: Please refer to websites such as http://www. homenethelp. com and http://www. microsoft. com/windows2000 for information about networking computers using Windows 2000, ME or 98. Go to Start > Control Panel > Network Connections Select Set up a home or small office network When this screen appears, click Next. 23 Networking Basics Using the Network Setup Wizard in Windows XP Please follow all the instructions in this window: Fig. 7. 2 Click Next In the following window, select the best description of your computer. If your computer connects to the Internet through a gateway/router, select the second option as shown. Fig. 7. 3 Click Next 24 Networking Basics Enter a Computer description and a Computer name. Fig. 7. 4 Click Next Enter a Workgroup name. All computers on your network should have the same Workgroup name. Fig. 7. 5 Click Next 25 Networking Basics Please wait while the wizard applies the changes. Fig. 7. 6 When the changes are complete, click Next. Please wait while the wizard configures the computer. 7. 7 26 Networking Basics In the window below, select the best option. In this example, Create a Network Setup Disk has been selected. You will run this disk on each of the computers on your network. 7. 8 Insert a disk into the Floppy Disk Drive, in this case drive A: Fig. 7. 9 Format the disk if you wish, and click Next. 27 Networking Basics Please wait while the wizard copies the files. Fig. 7. 10 Please read the information under Here's how in the screen below. After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. [. . . ] This limited warranty provides specific legal rights and the product owner may also have other rights which vary from state to state. Trademarks: D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective manufacturers or owners. Copyright Statement: No part of this publication or documentation accompanying this Product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc. , as stipulated by the United States Copyright Act of 1976. [. . . ]