User manual D-LINK D-VIEWCAM BROCHURE

[. . . ] D-Link D-ViewCam Central Management Software for SecuriCam Manual Version 1. 00 Building Networks for People Contents A. D-ViewCam Installation 1. D-ViewCam Main Functions Installation 3 3 3 3 3 2. 1. Basic Requirement for Installing D-ViewCam 2. 2. Minimum Requirement for Multiple Camera Configurations 3. D-ViewCam System Structures 3 B. Running the Installation Wizard 1. [. . . ] Select "Breach Device", and enter information to "Remark" field. The device selected in "Breach Device" Field is to react for the alarm detected. Step4. Set "Execution" time Action execution could be set by the delayed second you configured here. This setting does not apply to Live Video, which is always executed immediately. Step5. Create it to Alarm Action List Click Create to add action to alarm action list. If no further action to add, click Cancel to dismiss this window. 31 Alarm Action List Table Select Live Video Recording Email Preset DO ON DO OFF To Trigger the live video of breached camera, live video will pop up in Monitor's 4-split screen. Trigger the alarm recording of breached camera; alarm recording time is set by number of seconds. Trigger the email and take snapshot of breached device, one Email receiver at an action. Trigger PT camera which is breached turn to the preset point. Trigger the DO OFF of breached sensor. 8. 9. 3. Select " Alarm Video" Action" b y "Live Step2. Select "Breach Device", and enter "Remark" The live video display method of alarm action include the following: (1) If only one alarm is triggered, the different device breached by "live video" alarm action will be displayed on the 4 split screen of Monitor Program and is arranged starting from upper-left to upper-right, lower-left, and lower-right. (2) If live video is breached by different alarm source, live video is display accordingly. If the number of live video is greater than 4, they will be displayed rotationally. Step3. Dismiss the live video in 4-split screen Click Cancel Alarm button in Monitor program. 8. 9. 4. Alarm Action ­ Alarm Recording Step1. Select " Alarm Action" b y "Recording" Step2. Step3. Select "Breach Device", and enter "Remark" NoteFor the difference of Alarm Recording and Schedule Recording, refer to FAQ. For the other steps, refer to C8. 9. 2, 32 8. 9. 5. Select " Alarm Action" by "Email" Step2. Select "Breach Device", and enter "Remark" Select camera form "Breach Device" field and enter a brief description in "Remark" field to describe this alarm. Email will attached with two snapshot image files if you select camera other than "text only" Step3. Enter Email Address 8. 9. 6. Alarm Action ­ Others ( Model dependent) Step1. Select Alarm Action b y "Preset" Select Preset Point edited in C8. 5 from "Preset" field, please refer to C8. 9. 2. for the remaining steps. When alarm is detected, the system will turn PT camera to the specified preset point. Step2. Select Alarm Action b y "DO ON" /"DO OFF" Select "DO ON" /"DO OFF" from "Alarm action" field, please refer to C8. 9. 2. When alarm is detected, the system will turn off/on DO accordingly. 8. 9. 7. Examples 1. Set alarm triggered by Cam01-image and records the video of Cam01-image: Select Cam01-image icon in System setup Area and click Image Alarm button from Menu bar, then select "Alarm action" by Recording and "Breach Device" by "Cam01-image". [. . . ] After you've done this, all alarm settings are turned off. Please remember to turn it ON if you want the alarm actions to go back to normal. 21. Why no alarm message is received even though all settings in the Admin Program are correctly set? You may have by accident turned the alarm setting button on the Monitor Program screen to OFF. Click this button back to ON to receive alarm messages. 22. [. . . ]