User manual D-LINK DAP-1353

[. . . ] Table of Contents Table of Contents Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] You must specify the Year, Month, Day, Hour, Minute, and Second, or you can click the Copy Your Computer's Time Settings button to copy the system time from the computer being used to access the management interface. D-Link DAP-1353 User Manual 3 Section 3 - Configuration Device Info This page displays the current information for the DAP-1353. It will display the LAN and Wireless information. LAN: Displays the MAC address and the private (local) IP settings for the access point. Wireless Displays the wireless MAC address LAN: and your wireless settings such as SSID, Channel and Security Type. Status D-Link DAP-1353 User Manual 3 Section 3 - Configuration Statistics The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DAP-1353 on the LAN and Wireless network. The traffic counter will reset if the device is rebooted. Refresh Click Refresh to refresh the Traffic Statistics display. Reset Click Reset to reset the Traffic Statistics. D-Link DAP-1353 User Manual 3 Section 3 - Configuration Log The log information will include, but not limited to, the following items: · Upgrade Firmware · Client associate and disassociate with AP · Web login If you require D-Link DAP-1353 User Manual 3 Section 3 - Configuration Log Sever: If you require more space to hold your logs, please provide the IP address of the Server that will store your logs. The embedded memory can only have up to 300 logs. Log Server/IP Enter the IP address of the log server. Address: Log Type: Check the box for the type of activity you want to log. There are three types: System Activity, Wireless Activity, and Notice. Mail Server/IP Enter the IP address of the mail server. Address: Email: Enter mail address that you want send to. D-Link DAP-1353 User Manual 0 Section 3 - Configuration Client Info The Connected Wireless Client list shows the currently connected wireless clients. This table also displays the MAC address and wireless mode of the connected wireless clients. D-Link DAP-1353 User Manual 1 Section 3 - Configuration Support The Support page contains an index of links to help topics for each function of the DAP-1353. D-Link DAP-1353 User Manual Section - Security Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DAP-1353 offers the following types of security: · WPA-Personal (Pre-Shared Key) · WPA2-Personal (Pre-Shared Key 2) · WPA2-Auto-Personal · WEP (Wired Equivalent Privacy) · WPA-Enterprise (Extensible Authentication Protocol) · WPA2-Enterprise (Extensible Authentication Protocol 2) · WPA2-Auto-Enterprise (Extensible Authentication Protocol 2 Auto) What is WEP? WEP stands for Wired Equivalent Privacy. It is based on the IEEE 802. 11 standard and uses the RC4 encryption algorithm. WEP provides security by encrypting data over your wireless network so that it is protected as it is transmitted from one wireless device to another. To gain access to a WEP network, you must know the key. The key is a string of characters that you create. When using WEP, you must determine the level of encryption. The type of encryption determines the key length. 128-bit encryption requires a longer key than 64-bit encryption. Keys are defined by entering in a string in HEX (hexadecimal - using characters 0-9, A-F) or ASCII (American Standard Code for Information Interchange ­ alphanumeric characters) format. [. . . ] · Ad-Hoc ­ Directly connecting to another computer, for peer-to-peer communication, using wireless network adapters on each computer. An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. [. . . ]