User manual D-LINK DAP-2553

[. . . ] 78 D-Link DAP-2553 User Manual 3 Section 1 - Product Overview Product Overview Package Contents • D-Link DAP-2553 AirPremier N Dual Band PoE Access Point • Power Adapter • CAT5 Ethernet Cable • CD-ROM with User Manual • Install Guide Note: Using a power supply with a different voltage rating than the one included with the DAP-2553 will cause damage and void the warranty for this product. System Requirements • Computers with Windows®, Macintosh®, or Linux-based operating systems with an installed Ethernet Adapter • For configuration, the following web browsers are supported: • Microsoft® Internet Explorer® 6. 11n selectable AP increases productivity by allowing you to work faster and more efficiently. With the DAP-2553, bandwidth-intensive applications like graphics or multimedia will benefit significantly because large files are now able to move across the network quickly. [. . . ] VLAN Status: Use the radio button to toggle between Enable or Disable. Next, go to the Add/Edit VLAN tab to add or modify an item on the VLAN List tab. vLAN D-Link DAP-2553 User Manual 34 Section 3 - Configuration Port List The Port List tab displays the current ports. If you want to configure the guest and internal networks on a Virtual LAN (VLAN), the switch and DHCP server you are using must also support VLANs. As a prerequisite step, configure a port on the switch for handling VLAN tagged packets as described in the IEEE 802. Next, go to the Add/Edit VLAN tab to add or modify an item on the VLAN List tab. The name of the port is displayed in this column. The Tagged VID is displayed in this column. The Untagged VID is displayed in this column. The Port VLAN Identifier is displayed in this column. port Name: Tag VID: Untag VID: PVID: D-Link DAP-2553 User Manual 35 Section 3 - Configuration Add/Edit VLAN The Add/Edit VLAN tab is used to configure VLANs. Once you have made the desired changes, click the Save button to let your changes take effect. vLAN Status: VLAN ID: VLAN Name: Use the radio button to toggle to Enable. Provide a number between 1 and 4094 for the Internal VLAN. D-Link DAP-2553 User Manual 36 Section 3 - Configuration PVID Setting The PVID Setting tab is used to enable/disable the Port VLAN Identifier Auto Assign Status as well as to configure various types of PVID settings. Click the Save button to let your changes take effect. VLAN Status: PVID Auto Assign Status: Use the radio button to toggle between Enable and Disable. use the radio button to toggle PVID auto assign status to Enable. D-Link DAP-2553 User Manual 37 Section 3 - Configuration Intrusion The Wireless Intrusion Protection window is used to set APs as All, Valid, Neighborhood, Rogue, and New. Click the Save button to let your changes take effect. aP List: Detect: The choices include All , Valid , Neighbor , Rogue , and New. Click this button to initiate a scan of the network. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. [. . . ]