User manual D-LINK DAP-3320

[. . . ] Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. 00 Date June 30, 2015 Description • Initial release for revision A1 Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc. [. . . ] function Dynamic Host Configuration Protocol (DHCP) assigns dynamic IP addresses Enable/ to devices on the network. This protocol simplifies network management and Disable: allows new wireless devices to receive IP addresses automatically without the need to manually assign new IP addresses. select Enable to allow the DAP-3320 to function as a DHCP server. IP Assigned Input the first IP address available for assignment on your network. From: IP Pool Enter the number of IP addresses available for assignment. IP addresses are Range (1-254): increments of the IP address specified in the “IP Assigned From” field. Subnet All devices in the network must have the same subnet mask to communicate. Mask: Enter the submask for the network here. Gateway: Enter the IP address of the gateway on the network. WINS: Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that determines the IP address of a network computer that has a dynamically assigned IP address. DNS: Enter the IP address of the Domain Name System (DNS) server. The DNS server translates domain names such as www. Domain Enter the domain name of the network, if applicable. ) Lease Time : The lease time is the period of time before the DHCP server will assign new IP addresses. This protocol simplifies network management and Disable: allows new wireless devices to receive IP addresses automatically without the need to manually assign IP addresses. The IP addresses assigned in the Static Pool list must NOT be in the same IP range as the Dynamic Pool. After you have assigned a static IP address to a device via its MAC address, click Save; the device will appear in the Assigned Static Pool at the bottom of the screen. You can edit or delete the device in this list. Assigned Enter the MAC address of the device requesting association here. MAC Address: Subnet Mask: Define the submask of the IP address specified in the IP Assigned From field. Gateway: Specify the Gateway address for the wireless network. [. . . ] When transporting a sensitive component, first place it in an antistatic container or packaging. If possible, use antistatic floor pads, workbench pads, and an antistatic grounding strap. For more information, please refer to the warranty guide. D-Link DAP-3320 User Manual 129 Appendix E - Regulatory Information Disposing of and Recycling Your Product ENGLISH This symbol on the product or packaging means that according to local laws and regulations this product should be not be disposed of in the household waste but sent for recycling. [. . . ]