User manual D-LINK DCS-6111

[. . . ] Table of Contents Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Server Name: Select your Dynamic DNS provider from the drop down menu. Host Name: Enter the host name of the DDNS server. Username: Enter your username or e-mail used to connect to the DDNS server. Password: Enter your password used to connect to the DDNS server. Status: Indicates the current connection status. D-Link DCS-6111 User Manual 48 Section 3 - Configuration ImageSetup You may configure the image settings of the video for your network camera. A preview of the image will be shown in the window of Live Video. Click Save Settings to save and activate your changes. Color: Select either a Color or B/W (black and white, monochrome) video display. Frequency: Video Orientation: Flip will vertically rotate the video. Mirror will horizontally rotate the video. You may check both options if the camera is being installed upside down. AGC: Select to set the Automatic Gain Control value. Automatic Gain Control increases the sensitivity of the camera and is used to automatically adjust the gain level of the video signal to a predetermined value. The following options are available - 2X, 4X, or 8 X (field time multiples). The higher the value, the brighter the image will be, but this also increases the noise ratio accordingly. This option is only available when WDR is unchecked. Exposure Level: Select to set the exposure level from the dropdown box. The range included is from 1 to 8 and the default value is 4. A higher value produces a brighter image. This option is only available when WDR is unchecked. D-Link DCS-6111 User Manual 49 Section 3 - Configuration Enable WDR Select to enable the WDR function. WDR provides better performance especially when the image contains both very dark (Wide Dynamic and bright areas. Also helps the camera to cope with varying lighting conditions. Range): Note: When you select this function, Exposure level and AGC functions will be disabled. [. . . ] If you are connecting to a wireless network at a hotspot (e. g. hotel, coffee shop, airport), please contact an employee or administrator to verify their wireless network settings. D-Link DCS-6111 User Manual 80 Appendix A - Networking Basics StaticallyAssignanIPaddress If you are not using a DHCP capable gateway/access point, or you need to assign a static IP address, please follow the steps below: Step 1 Windows Vista® Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections. ® Windows XP - Click on Start > Control Panel > Network Connections. Step 2 Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties. [. . . ]