User manual D-LINK DES-1024R+ BROCHURE

[. . . ] 10/100Mbps Unmanaged Switches DES-1016R+ DES-1024R+ Top: DES-1016R+ switch with 16 auto-sensing 10/100Mbps ports. Bottom: DES-1024R+ switch with 24 auto-sensing 10/100Mbps ports. [. . . ] The port will autosense the attached device type and adjust the Tx, Rx pin assignments accordingly before transmitting and receiving data. Optional 100Mbps Fiber Ports An open slot is provided on the front panel to let you install an optional Fast Ethernet fiber module. This module provides 2 100Mbps fiber ports for 2 server connections or switch-to-switch cascading over the reliable fiber cables, which can be up to 2km long. Flow Control Protects Against Data Loss Using flow control (in full duplex and applicable to all 10/100Mbps ports), the switch monitors the buffer status of each port. During peak usage, if the buffer fills to capacity, the switch detects this and signals to the attached node to delay sending new data until the switch can accept it. This operation minimizes the chance of any buffer overrun where incoming data overwrites the current data that has not been completely flushed out of the buffer. This function works with flow control supported Fast Ethernet adapters (installed in servers) connected to the switch in dedicated bandwidth configuration. It can also be applied to switch-to-switch cascading. Easy Expansion Cascading 2 switches together to expand the network using the twisted-pair ports is easy. As all 10/100Mbps ports support auto-negotiation of MDI/MDIX twisted-pair cable cross-over, you simply connect 2 switches together without having to find a cross-over cable or to make sure the ports are uplink ports. At 200Mbps full-duplex speed, all ports provide a fast switch-to-switch dedicated bandwidth. 16 or 24 10/100Mbps ports Key Features 1 expansion slot for 2 optional 100Mbps fiber ports Full/half duplex support for each port Auto-learning of network configuration IEEE 802. 3x flow control in full duplex mode for protection against data loss Back pressure in half duplex mode Auto-adjustment of MDI/MDIX cross over for each port Auto-correction of twisted-pair polarity reverse RAM buffer dynamically allocated for each port DES-1016R+/1024R+ Technical Specifications General Standards - IEEE 802. 3 10BASE-T Ethernet - IEEE 802. 3u 100BASE-TX Fast Ethernet - IEEE 802. 3u 100BASE-FX Fast Ethernet - ANSI/IEEE 802. 3 NWay auto-negotiation - IEEE 802. 3x Flow Control Protocol CSMA/CD Data Transfer Rates - Ethernet: 10Mbps (half duplex) 20Mbps (full duplex) - Fast Ethernet: 100Mbps (half duplex) 200Mbps (full duplex) Topology Star Network Cables - 10BASE-T: 2-pair UTP Cat. [. . . ] 2001) Printed in Taiwan 7ES1016R+010 U. S. A. Germany France Italy Iberia Sweden Norway Denmark Finland Singapore Australia Japan China India Middle East South America South Africa Russia Taiwan D-Link Corp. F USA TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: TEL: 1-949-788-0805 1-905-829-5033 44-20-8731-5555 44-20-8731-5555 49-61- 96779900 33-1-30. 23. 86. 88 39-02-2900-0676 34-93-4965751 46-(0)8-564-61900 47-22-991890 45-43-96. 90. 40 358-9-622-91660 65-774-6233 61-2-9417-7100 81-3-5434-9678 86-10-88097777 91-22-652-6696 202-2456176 56-2-232-3185 27(0)126652165 7-095-737-3389 886-2-2910-2626 886-2-2916-1600 FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: FAX: 1-949-753-7033 1-905-829-5095 44-20-8235-5511 44-20-8235-5511 49-61-967799300 33-1-30. 23. 86. 89 39-02-2900-1723 34-93-4965701 46-(0)8-564-61901 47-22-207039 45-43-42. 43. 47 358-9-622-91661 65-774-6322 61-2-9417-1077 81-3-5434-9868 86-10-88096789 91-22-652-8914 202-2456192 56-2-232-0923 27(0)126652186 7-095-737-3390 886-2-2910-1515 886-2-2914-6299 [. . . ]