User manual D-LINK DUB-E100

[. . . ] It also supports USB energy-saving suspend and resume functions to minimize power consumption, which is especially useful for laptop/notebook users. Features Designed for versatility and performance, the DUB-E100 USB 2. 0 10/100 Fast Ethernet Adapter provides the following: • Compliant with USB 2. 3 Ethernet standards • Plug-and-Play installation • Auto 10/100 Mbps speed detection • Supports half and full-duplex at 10 Mbps, half and full-duplex at 100 Mbps • One built-in RJ-45 connector • Auto-negotiation to the highest available speed • Two LED indicators: Link, TX/RX • Driver support: • Microsoft Windows 7 (x86, x64) • Microsoft Windows Vista (x86, x64) • Microsoft Windows XP (x86/x64 Edition) • Linux (kernel 2. [. . . ] Select Yes, this time only and click Next to continue. Choose Install the software automatically and click Next to continue. D-Link DUB-E100 User Manual 8 Section 2 - Installation When the Windows XP driver installation is complete, you can connect the DUB-E100 to a USB port on your computer. Please then proceed to Connecting the Adapter to a Network on page 14. D-Link DUB-E100 User Manual 9 Section 2 - Installation Mac OS X The following screenshots were taken from Mac OS X 10. 5, but the steps are similar in other versions of OS X. Your operating system must be version 10. Please insert the DUB-E100 CD into your computer’s DVD or CD drive, then go to the DUB-E100 folder and navigate to \Drivers\MAC. If you wish to change the drive where the installation will take place, click Change Install Location. D-Link DUB-E100 User Manual 11 Section 2 - Installation If you clicked Change Install Location, you will see the Destination Select screen. select a Destination Volume , then click Continue. Enter the name and password of a user with administrative rights. The computer will then restart itself after the installation is complete. Please then proceed to Connecting the Adapter to a Network on page 14. To compile the provided Linux driver, you need the Linux 2. Also, please make sure the kernel is built with “Support for Host-side, EHCI, OHCI, and UHCI” option. Insert the CD into the CD drive of your computer and go to the Drivers\Linux\ directory. 14_REV101 folder and execute the following command to compile the driver. Ko will be created under the current directory. If you want to use modprobe command to mount the driver, execute the following command to install the driver on your Linux. 14_rev101]# make install To mount the driver, go to the LINUX2. Ko or [root@localhost anywhere]# modprobe asix To unmount the driver, just typing the following command: [root@localhost anywhere]# rmmod asix [root@localhost anywhere]# rmmod usbnet Please then proceed to Connecting the Adapter to a Network on page 14. [. . . ] €¢ Expand the Network Adapters heading by clicking on the plus (+) sign next to Network Adapters. • Right-click on the My Computer icon and select Properties. €¢ The D-Link USB DUB-E100 should appear with a green and gold network adapter symbol. If the D-Link USB DUB-E100 in Device Manager appears with a bright yellow exclamation mark or a red x, please contact D-Link Technical Support. [. . . ]