User manual D-LINK DWL-8200AP INSTALLATION GUIDE

[. . . ] System Requirements DWL-8200AP Install Guide Minimum System Requirements: · CD-ROM Drive · Computers with Windows®, Macintosh®, or Linux-based operating systems · Installed Ethernet Adapter · Internet Explorer version 6. 0 or Netscape NavigatorTM version 7. 0 and above System Requirements Package Contents 2 D-Link Systems, Inc. DWL-8200AP Install Guide Installing the Hardware Installing the Hardware Antennas Power Cord socket LAN 1 (PoE) LAN 2 Reset D-Link Systems, Inc. 3 Installing the Hardware DWL-8200AP Install Guide Step 1 Connect one end of an Ethernet cable (included with your package) to the LAN 1 (PoE) port on the DWL-8200AP, and the other end of the Ethernet cable to the port labeled P+DATA OUT on the PoE base unit. Step 2 Connect another Ethernet cable from the DATA IN port on the PoE base unit to your router/switch or to a PC. Step 3 Attach the power adapter to the connector labeled POWER IN on the PoE base unit. Attach the power cord to the power adapter and into an electrical outlet. 4 D-Link Systems, Inc. DWL-8200AP Install Guide The Setup Wizard Using the Setup Wizard Open your Web browser and type http://192. 168. 0. 50 into the URL address box. [. . . ] Click Next WPA-Personal Select WPA-Personal for an 802. 11a Network. Click Next For 802. 11a networks please do the following: WPA Encryption for 802. 11a Provide an alphanumeric PassPhrase that is between 8 to 63 characters. By default, the Group Key Update Interval is set to 1800 seconds (30 minutes). After 1800 seconds have passed, the key will change again. Click Next 10 D-Link Systems, Inc. DWL-8200AP Install Guide For 802. 11g networks please do the following: The Setup Wizard Set Wireless LAN 802. 11g Connection By default the DWL-8200AP SSID is set to default with a Channel setting of 6. Click Next For 802. 11g Network continue to page 12. 11 The Setup Wizard DWL-8200AP Install Guide Security level options for an 802. 11g network are as follows: No Security - current page WEP - continue to page 13 WPA-Personal - continue to page 14 No Security Select No Security for an 802. 11g Network. Click Next Click Restart Your Setup is complete!(continue to page 15) 12 D-Link Systems, Inc. DWL-8200AP Install Guide WEP Select WEP for an 802. 11g Network. The Setup Wizard Click Next For 802. 11g networks please do the following: WEP Encryption for 802. 11g The DWL-8200AP is capable of three levels of encryption: 64-bit, 128-bit, and 152-bit (using only Hexadecimal). You can change the encryption settings for more secure wireless communication. Click Next Click Restart Your Setup is complete!(continue to page 15) D-Link Systems, Inc. 13 The Setup Wizard WPA-Personal Select WPA-Personal for an 802. 11g Network. DWL-8200AP Install Guide Click Next For 802. 11g networks please do the following: WPA Encryption for 802. 11g Provide an alphanumeric PassPhrase that is between 8 to 63 characters. By default, the Group Key Update Interval is set to 1800 seconds (30 minutes). After 1800 seconds have passed, the key will change again. Click Next Click Restart Your Setup is complete!(continue to page 15) 14 D-Link Systems, Inc. DWL-8200AP Install Guide Your Setup is Complete! Your Setup is Complete! When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this: * Maximum Wireless signal rate dervied from IEEE Standard 802. 11a and 802. 11g specifications. [. . . ] All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein. [. . . ]